Hi Peng
I have a design with imx6ull that is running properly according to the
manufacturer with the old REFTOP_VBGA set
BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ,. With this commit, the TJunction of
the CPU is around 8 degree more than without. The commit message does
not provide any info
According to the design team, we need to set REFTOP_VBGADJ
in PMU MISC0 according to the REFTOP_TRIM[2:0] fuse. the
actually table is as below:
'000" - set REFTOP_VBGADJ[2:0] to 3'b000
'001" - set REFTOP_VBGADJ[2:0] to 3'b001
'010" - set REFTOP_VBGADJ[2:0] to 3'b010
'011" - set REFTOP_VBGADJ[2:0] to 3'b011
'100" - set REFTOP_VBGADJ[2:0] to 3'b100
'101" - set REFTOP_VBGADJ[2:0] to 3'b101
'110" - set REFTOP_VBGADJ[2:0] to 3'b110
'111" - set REFTOP_VBGADJ[2:0] to 3'b111
Can someone describe to me better? The device needs to run in a very
hot environment and 10 to 8 degrees on the junction
are really important.
In the same environment:
temp without this patch 34
temp with is 43
Register value is
0x240080E8
and
0x24008088
Michael
--
Michael Nazzareno Trimarchi
Amarula Solutions BV
COO Co-Founder
Cruquiuskade 47 Amsterdam 1018 AM NL
T. +31(0)851119172
M. +39(0)3479132170
[`as] https://www.amarulasolutions.com
