Hi
On Sat, Nov 21, 2020 at 11:30 PM Pali Rohár <p...@kernel.org> wrote:
>
> It looks like that i2c bus lot of times timeout on some units. Prior
> migration to CONFIG_DM_I2C i2c speed was set to CONFIG_SYS_OMAP24_I2C_SPEED
> value which was 100000. Lower speed fixes timeout problems, so change speed
> back to its previous value.
>
> Signed-off-by: Pali Rohár <p...@kernel.org>
> Fixes: 8d8c18170325 ("Nokia RX-51: Convert to CONFIG_DM_I2C")
> ---
> Please include this patch into U-Boot master branch for 2020.01 release
> to have i2c bus working.
> ---
> board/nokia/rx51/rx51.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c
> index 3d62b5d9ad..2dd41604c9 100644
> --- a/board/nokia/rx51/rx51.c
> +++ b/board/nokia/rx51/rx51.c
> @@ -704,9 +704,9 @@ void board_mmc_power_init(void)
> }
>
> static const struct omap_i2c_platdata rx51_i2c[] = {
> - { I2C_BASE1, 2200000, OMAP_I2C_REV_V1 },
> + { I2C_BASE1, 100000, OMAP_I2C_REV_V1 },
I can understand this one. I don't know what kind of speed was before
> { I2C_BASE2, 100000, OMAP_I2C_REV_V1 },
> - { I2C_BASE3, 400000, OMAP_I2C_REV_V1 },
> + { I2C_BASE3, 100000, OMAP_I2C_REV_V1 },
Can you report the peripherals have this problem? I mean
a lot of i2c devices can run to 400Khz. And how are those buses
configured in the kernel?
Michael
> };
>
> U_BOOT_DEVICES(rx51_i2c) = {
> --
> 2.20.1
>
--
Michael Nazzareno Trimarchi
Amarula Solutions BV
COO Co-Founder
Cruquiuskade 47 Amsterdam 1018 AM NL
T. +31(0)851119172
M. +39(0)3479132170
[`as] https://www.amarulasolutions.com
