[PATCH] mmc: meson_gx_mmc: change a clock phase to stable value

[Jaehoon Chung]

Core clock phase value is changed from 180' to 270'.
It's more stable than before.
- Odroidn-N2/C4 : Working fine with 52MHz
- VIM3 : Working fine with 52MHz

Before this patch, Odroid-C4 doesn't work fine with 52MHz.

Signed-off-by: Jaehoon Chung <jh80.ch...@samsung.com>
---
 drivers/mmc/meson_gx_mmc.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
index 719dd1e5e570..7c60e0566560 100644
--- a/drivers/mmc/meson_gx_mmc.c
+++ b/drivers/mmc/meson_gx_mmc.c
@@ -52,10 +52,16 @@ static void meson_mmc_config_clock(struct mmc *mmc)
        }
        clk_div = DIV_ROUND_UP(clk, mmc->clock);
 
-       /* 180 phase core clock */
-       meson_mmc_clk |= CLK_CO_PHASE_180;
-
-       /* 180 phase tx clock */
+       /*
+        * Clock Phase needs to set a proper value.
+        * It can be changed to other value.
+        * Because CORE : 270' Phase and TX : 0' Phase are stable,
+        * set to them by default.
+        */
+       /* Core Clock Phase */
+       meson_mmc_clk |= CLK_CO_PHASE_270;
+
+       /* TX Clock Phase */
        meson_mmc_clk |= CLK_TX_PHASE_000;
 
        /* clock settings */
-- 
2.29.0