Enable it by default for board detection. Signed-off-by: Michal Simek <michal.si...@xilinx.com> ---
configs/xilinx_versal_virt_defconfig | 1 + configs/xilinx_zynq_virt_defconfig | 1 + configs/xilinx_zynqmp_virt_defconfig | 1 + 3 files changed, 3 insertions(+) diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig index b6ca566ed8cd..34ff8ddde0c1 100644 --- a/configs/xilinx_versal_virt_defconfig +++ b/configs/xilinx_versal_virt_defconfig @@ -4,6 +4,7 @@ CONFIG_ARCH_VERSAL=y CONFIG_SYS_TEXT_BASE=0x8000000 CONFIG_SYS_MALLOC_F_LEN=0x100000 CONFIG_DM_GPIO=y +CONFIG_CMD_FRU=y CONFIG_DEFINE_TCM_OCM_MMAP=y CONFIG_COUNTER_FREQUENCY=100000000 CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig index df3da763c500..439a4fe6e539 100644 --- a/configs/xilinx_zynq_virt_defconfig +++ b/configs/xilinx_zynq_virt_defconfig @@ -6,6 +6,7 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 CONFIG_DM_GPIO=y CONFIG_SPL_STACK_R_ADDR=0x200000 CONFIG_SPL=y +CONFIG_CMD_FRU=y CONFIG_DEFAULT_DEVICE_TREE="zynq-zc706" CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_CUSTOM_LDSCRIPT=y diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 01b2f18a057a..8937658a25d5 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -9,6 +9,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_ZYNQ_MAC_IN_EEPROM=y CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 +CONFIG_CMD_FRU=y CONFIG_ZYNQMP_USB=y CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu100-revC" CONFIG_AHCI=y -- 2.28.0
