On 07.10.2020 18:17, Claudiu Beznea wrote: > Hi, > > This series adds SAM9X60 clock support, CCF compatible, so that > SAM9X60 based boards (e.g. SAM9X60-EK in this case) to be able > to boot with mainline code. > > This series is based on u-boot-atmel/next. > > Thank you, > Claudiu Beznea > > Changes in v3: > - move u-boot,dm-pre-reloc properties to sam9x60ek-u-boot.dtsi > - add main_xtal to sam9x60ek-u-boot.dtsi in patch 8/8 > > Changes in v2: > - remove "Alignment should match open parenthesis" and > "Please don't use multiple blank lines" checkpatch.pl warnings > - use u-boot,dm-pre-reloc also in sam9x60ek-u-boot.dtsi > - add patch 8/8 > > Claudiu Beznea (8): > board: atmel: sam9x60ek: add SYS_MALLOC_F_LEN to SYS_INIT_SP_ADDR > clk: at91: sam9x60: add support compatible with CCF > ARM: dts: sam9x60ek: add clock frequencies to board file > ARM: dts: sam9x60: use u-boot,dm-pre-reloc > ARM: dts: sam9x60: use slow clock CCF compatible bindings > ARM: dts: sam9x60: use CCF compatibles for PMC > configs: sam9x60ek: update defconfigs for CCF > ARM: dts: sam9x60: use alphabetical order > > arch/arm/dts/sam9x60.dtsi | 171 ++------- > arch/arm/dts/sam9x60ek-u-boot.dtsi | 70 +--- > arch/arm/dts/sam9x60ek.dts | 12 +- > configs/sam9x60ek_mmc_defconfig | 4 +- > configs/sam9x60ek_nandflash_defconfig | 4 +- > configs/sam9x60ek_qspiflash_defconfig | 4 +- > drivers/clk/at91/Makefile | 1 + > drivers/clk/at91/sam9x60.c | 649 > ++++++++++++++++++++++++++++++++++ > include/configs/sam9x60ek.h | 3 +- > 9 files changed, 716 insertions(+), 202 deletions(-) > create mode 100644 drivers/clk/at91/sam9x60.c >
Applied series to u-boot-atmel/master, thanks !
