On 10/17/20 2:53 PM, Andy Pont wrote:
Giulio wrote...
Is there a preferred / recommended toolchain for building U-Boot for the
i.MX RT10xx platforms or should any recent ARM cross compiler work?
It should compile fine with any recent ARM cross-compiler.
Please let me know if it builds correctly
I used the arm-linux-gnueabi-gcc v10.1.0 compiler available from
www.kernel.org and it has built fine. Now I have a working toolchain I
can start adding the new board.
Perfect, I suggest you to test it on a EVK before than going with your
custom board if you can, and after port your board, that should make it
easier.
Kind regards
--
Giulio Benetti
Benetti Engineering sas
