Hi Shashidhar.H.G, > I'm trying to port uCLinux on to the LPC 2468-16 OEM Board.
You may have noticed that this is the U-Boot mailing list. If you have trouble with uCLinux, the linux-arm mailing list is more to the point. > .HEX file is been generated by following the steps (Section 10) given in the > document (Getting_started_with_uClinux), and now am trying to flash the same > .HEX file to the board using Flash Magic tool and am facing some issue, > please find the attachment for Error Snapshot. I have no clue what document you are talking about, sorry. > On target side, all the necessary setting has been done including the jumper > setting given in LPC2468_OEM_Board_Users_Guide. > > but i din't get the u-boot prompt in the terminal window its gets struck in > the > starting display itself. http://old.nabble.com/file/p29815748/Error.jpg.JPG > Error.jpg.JPG This seems like a general problem outside the scope of U-Boot. Have you communicated with the board previously at all? Are the cables correct? Cheers Detlev -- ... the tools we are trying to use and the language or notation we are using to express or record our thoughts, are the major factors determining what we can think or express at all! -- Edsger W. Dijkstra -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: d...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
