Hi Sergio, On Tuesday 28 September 2010 10:10:52 Sergio Navarrez wrote: > I’m working with AMCC Sequioa board. Nor and Nand memories was erased, and > I’m trying to program the Nand flash with the last u-boot version via > debugger. I followed the respective steps from your manual and compiled > u-boot with ELDK. But u-boot doesn’t work. > > What can I do, to solve this problem?
You can only program NOR flash via the JTAG debugger. At least the BDI2000/3000 doesn't support NAND flash programming. So you either need to program U-Boot into NOR flash (target sequoia) or use the RAM booting Sequoia image (target sequoia_ramboot). And then use U-Boot itself to program the NAND booting image (target sequoia_nand) into NAND. Cheers, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: off...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
