Hi Siew, On Thu, 1 Oct 2020 at 10:52, Michal Simek <mon...@monstr.eu> wrote: > > > > On 01. 10. 20 11:15, Siew Chin Lim wrote: > > This is the 2nd version of patchset to Enable ARM Trusted Firmware > > for U-Boot. > > > > New U-boot flow with ARM Trusted Firmware (ATF) support: > > SPL (EL3) -> ATF-BL31 (EL3) -> U-Boot Proper (EL2) -> Linux (EL1) > > > > SPL loads the u-boot.itb which consist of: > > 1) u-boot-nodtb.bin (U-Boot Proper image) > > 2) u-boot.dtb (U-Boot Proper DTB) > > 3) bl31.bin (ATF-BL31 image) > > > > Supported Platform: Intel SoCFPGA 64bits (Stratix10 & Agilex) > > > > Patch status: > > Have changes: Patch 2, 8, 9, 10, 11, 16 > > Other patches unchanged. > > > > Detail changelog can find in commit message. > > > > v1->v2: > > -------- > > Patch 2: > > - Move soc64 folder from board/altera to board/intel folder > > > > Patch 8: > > - Updated comments > > > > Patch 9: > > - Code clean up without functionality change > > > > Patch 10: > > - Code clean up without functionality change > > > > Patch 11: > > - Print error message and return instead of hang in socfpga_bridges_reset() > > when SMC call is failing. > > > > Patch 16: > > - Add CONFIG_SPL_LOAD_FIT_ADDRESS=0x02000000 > > - Move board/altera/soc64/fit_spl_atf.sh to board/intel/soc64/fit_spl_atf.sh > > > > History: > > -------- > > [v1]: https://patchwork.ozlabs.org/project/uboot/list/?series=195854 > > > > > > These patchsets have dependency on: > > arm: socfpga: soc64: Add timeout waiting for NOC idle ACK > > https://lists.denx.de/pipermail/u-boot/2020-August/423029.html > > > > Rename Stratix10 FPGA driver and support Agilex > > https://lists.denx.de/pipermail/u-boot/2020-August/422798.html > > > > SoCFPGA mailbox driver fixes and enhancements > > https://lists.denx.de/pipermail/u-boot/2020-August/423140.html > > > > arm: socfpga: soc64: Initialize timer in SPL only > > https://lists.denx.de/pipermail/u-boot/2020-July/419692.html > > > > arm: socfpga: soc64: Remove PHY interface setup from misc arch init > > https://lists.denx.de/pipermail/u-boot/2020-July/419690.html > > > > Enable sysreset support for SoCFPGA SoC64 platforms > > https://lists.denx.de/pipermail/u-boot/2020-August/422509.html > > > > arm: socfpga: soc64: Disable CONFIG_PSCI_RESET > > https://lists.denx.de/pipermail/u-boot/2020-August/423373.html > > > > Chee Hong Ang (16): > > arm: socfpga: soc64: Remove CONFIG_OF_EMBED > > arm: socfpga: soc64: Add FIT generator script for pack itb with ATF > > arm: socfpga: Add function for checking description from FIT image > > arm: socfpga: soc64: Load FIT image with ATF support > > arm: socfpga: soc64: Override 'lowlevel_init' to support ATF > > arm: socfpga: Disable "spin-table" method for booting Linux > > arm: socfpga: soc64: Add SMC helper function for Intel SOCFPGA > > (64bits) > > arm: socfpga: soc64: Define SMC function identifiers for PSCI SiP > > services > > mmc: dwmmc: socfpga: Add ATF support for MMC driver > > net: designware: socfpga: Add ATF support for MAC driver > > arm: socfpga: soc64: Add ATF support for Reset Manager driver > > arm: socfpga: soc64: Add ATF support for FPGA reconfig driver > > arm: socfpga: mailbox: Add 'SYSTEM_RESET' PSCI support to > > mbox_reset_cold() > > arm: socfpga: soc64: SSBL shall not setup stack on OCRAM > > arm: socfpga: soc64: Skip handoff data access in SSBL > > configs: socfpga: Add defconfig for Agilex and Stratix 10 with ATF > > support > > > > arch/arm/mach-socfpga/Kconfig | 2 - > > arch/arm/mach-socfpga/Makefile | 4 + > > arch/arm/mach-socfpga/board.c | 12 +- > > arch/arm/mach-socfpga/include/mach/smc_api.h | 13 + > > arch/arm/mach-socfpga/lowlevel_init_soc64.S | 76 +++ > > arch/arm/mach-socfpga/mailbox_s10.c | 5 + > > arch/arm/mach-socfpga/reset_manager_s10.c | 13 + > > arch/arm/mach-socfpga/smc_api.c | 56 ++ > > arch/arm/mach-socfpga/wrap_pll_config_s10.c | 3 +- > > board/intel/soc64/fit_spl_atf.sh | 92 ++++ > > The patch > > commit f4a43d292527ac671dee616ac973899d90a43401 > Author: Simon Glass <s...@chromium.org> > AuthorDate: Sun Jul 19 13:56:11 2020 -0600 > Commit: Simon Glass <s...@chromium.org> > CommitDate: Tue Jul 28 19:30:39 2020 -0600 > > Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR > > Add warning to migrate to binman. It means do it directly. >
Yes, no more scripts please. Let me know if you need help. Regards, Simon
