[PATCH v2 1/1] riscv: reset after crash

[Heinrich Schuchardt]

If an exception occurs on ARM or x86, we call panic() which will try to
reset the board. Do the same on RISC-V.

To avoid -Werror=format-zero-length move a '\n' to the string passed to
panic. We don't need a message here as depending on CONFIG_PANIC_HANG we
will either see

    ### ERROR ### Please RESET the board ###

or

    resetting ...

as next message.

Signed-off-by: Heinrich Schuchardt <xypron.g...@gmx.de>
---
v2:
        Remove a superfluous message passed to panic().
---
 arch/riscv/lib/interrupts.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/riscv/lib/interrupts.c b/arch/riscv/lib/interrupts.c
index 8ff40f0f36..43b10a2b9b 100644
--- a/arch/riscv/lib/interrupts.c
+++ b/arch/riscv/lib/interrupts.c
@@ -27,7 +27,7 @@ static void show_efi_loaded_images(uintptr_t epc)
 static void show_regs(struct pt_regs *regs)
 {
 #ifdef CONFIG_SHOW_REGS
-       printf("SP:  " REG_FMT " GP:  " REG_FMT " TP:  " REG_FMT "\n",
+       printf("\nSP:  " REG_FMT " GP:  " REG_FMT " TP:  " REG_FMT "\n",
               regs->sp, regs->gp, regs->tp);
        printf("T0:  " REG_FMT " T1:  " REG_FMT " T2:  " REG_FMT "\n",
               regs->t0, regs->t1, regs->t2);
@@ -45,7 +45,7 @@ static void show_regs(struct pt_regs *regs)
               regs->s7, regs->s8, regs->s9);
        printf("S10: " REG_FMT " S11: " REG_FMT " T3:  " REG_FMT "\n",
               regs->s10, regs->s11, regs->t3);
-       printf("T4:  " REG_FMT " T5:  " REG_FMT " T6:  " REG_FMT "\n\n",
+       printf("T4:  " REG_FMT " T5:  " REG_FMT " T6:  " REG_FMT "\n",
               regs->t4, regs->t5, regs->t6);
 #endif
 }
@@ -79,12 +79,12 @@ static void _exit_trap(ulong code, ulong epc, ulong tval, 
struct pt_regs *regs)
        printf("EPC: " REG_FMT " RA: " REG_FMT " TVAL: " REG_FMT "\n",
               epc, regs->ra, tval);
        if (gd->flags & GD_FLG_RELOC)
-               printf("EPC: " REG_FMT " RA: " REG_FMT " reloc adjusted\n\n",
+               printf("EPC: " REG_FMT " RA: " REG_FMT " reloc adjusted\n",
                       epc - gd->reloc_off, regs->ra - gd->reloc_off);

        show_regs(regs);
        show_efi_loaded_images(epc);
-       hang();
+       panic("\n");
 }

 int interrupt_init(void)
--
2.28.0