čt 27. 8. 2020 v 14:07 odesílatel Michal Simek <michal.si...@xilinx.com> napsal: > > From: T Karthik Reddy <t.karthik.re...@xilinx.com> > > Add CONFIG_XILINX_UARTLITE config to versal/zynqmp defconfig to > enable uartlite driver support by default. > > Signed-off-by: T Karthik Reddy <t.karthik.re...@xilinx.com> > Signed-off-by: Michal Simek <michal.si...@xilinx.com> > --- > > configs/xilinx_versal_virt_defconfig | 1 + > configs/xilinx_zynqmp_virt_defconfig | 1 + > 2 files changed, 2 insertions(+) > > diff --git a/configs/xilinx_versal_virt_defconfig > b/configs/xilinx_versal_virt_defconfig > index f9edc727176f..c84bf2ead6ea 100644 > --- a/configs/xilinx_versal_virt_defconfig > +++ b/configs/xilinx_versal_virt_defconfig > @@ -79,6 +79,7 @@ CONFIG_MII=y > CONFIG_ZYNQ_GEM=y > CONFIG_ARM_DCC=y > CONFIG_PL01X_SERIAL=y > +CONFIG_XILINX_UARTLITE=y > CONFIG_SPI=y > CONFIG_DM_SPI=y > CONFIG_USB=y > diff --git a/configs/xilinx_zynqmp_virt_defconfig > b/configs/xilinx_zynqmp_virt_defconfig > index 00a53f36e47b..23d7ddf2d079 100644 > --- a/configs/xilinx_zynqmp_virt_defconfig > +++ b/configs/xilinx_zynqmp_virt_defconfig > @@ -122,6 +122,7 @@ CONFIG_ZYNQ_GEM=y > CONFIG_SCSI=y > CONFIG_DM_SCSI=y > CONFIG_ARM_DCC=y > +CONFIG_XILINX_UARTLITE=y > CONFIG_ZYNQ_SERIAL=y > CONFIG_SPI=y > CONFIG_ZYNQ_SPI=y > -- > 2.28.0 >
Applied. M -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
