On Tue, Sep 8, 2020 at 5:58 PM Wolfgang Wallner
<wolfgang.wall...@br-automation.com> wrote:
> -----"Andy Shevchenko" <andriy.shevche...@linux.intel.com> schrieb: -----
> > Betreff: [PATCH v1] cmd: acpi: Print revisions in hex format
> >
> > The revisions are usually dates in hex-decimal format representing
> > YYYYmmdd. Print them in hex to see this clearly.
> >
> > Before:
> > ...
> > FACP 000e5420 0000f4 (v06 U-BOOT U-BOOTBL 538970376 INTL 0)
> > DSDT 000e4780 000ba0 (v02 U-BOOT U-BOOTBL 65536 INTL 538968870)
> > ...
> > After:
> > ...
> > FACP 000e5420 0000f4 (v06 U-BOOT U-BOOTBL 20200908 INTL 0)
> > DSDT 000e4780 000ba0 (v02 U-BOOT U-BOOTBL 10000 INTL 20200326)
> > ...
> >
> > Fixes: 0b885bcfd9b0 ("acpi: Add an acpi command")
> > Cc: Wolfgang Wallner <wolfgang.wall...@br-automation.com>
> > Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
> > ---
> > cmd/acpi.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
>
> Reviewed-by: Wolfgang Wallner <wolfgang.wall...@br-automation.com>
> Tested-by: Wolfgang Wallner <wolfgang.wall...@br-automation.com>
> Tested on a custom Apollolake board.
Thanks!
> Related to "acpi list":
> During my recent ACPI debugging I found it very useful to have the checksum
> printed for each table with "acpi list". Would there be interest to have that
> upstream? If so I would send a patch.
Can you elaborate what was the problem that checksum helped?
--
With Best Regards,
Andy Shevchenko
