[PATCH] ARM: imx: Add support for the primary/secondary bmode to MX53

[Marek Vasut]

Implement the 'getprisec' subcommand of 'bmode' command for i.MX53 and
also the primary/secondary bootmode switching.

Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Fabio Estevam <feste...@gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-...@nxp.com>
Cc: Peng Fan <peng....@nxp.com>
Cc: Stefano Babic <sba...@denx.de>
---
 arch/arm/mach-imx/mx5/soc.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/mx5/soc.c b/arch/arm/mach-imx/mx5/soc.c
index c61fcce3eb..47f531dc85 100644
--- a/arch/arm/mach-imx/mx5/soc.c
+++ b/arch/arm/mach-imx/mx5/soc.c
@@ -87,10 +87,27 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
 #endif
 
 #ifdef CONFIG_MX53
+#define IMX53_SRTC_LPGR_PERSIST_SECONDARY_BOOT BIT(30)
+
 void boot_mode_apply(unsigned cfg_val)
 {
-       writel(cfg_val, &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr);
+       void *lpgr = &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr;
+
+       if (cfg_val == MAKE_CFGVAL_PRIMARY_BOOT)
+               clrbits_le32(lpgr, IMX53_SRTC_LPGR_PERSIST_SECONDARY_BOOT);
+       else if (cfg_val == MAKE_CFGVAL_SECONDARY_BOOT)
+               setbits_le32(lpgr, IMX53_SRTC_LPGR_PERSIST_SECONDARY_BOOT);
+       else
+               writel(cfg_val, lpgr);
+}
+
+int boot_mode_getprisec(void)
+{
+       void *lpgr = &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr;
+
+       return !!(readl(lpgr) & IMX53_SRTC_LPGR_PERSIST_SECONDARY_BOOT);
 }
+
 /*
  * cfg_val will be used for
  * Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]
@@ -112,6 +129,8 @@ const struct boot_mode soc_boot_modes[] = {
        {"esdhc2",      MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)},
        {"esdhc3",      MAKE_CFGVAL(0x40, 0x20, 0x10, 0x12)},
        {"esdhc4",      MAKE_CFGVAL(0x40, 0x20, 0x18, 0x12)},
+       {"primary",     MAKE_CFGVAL_PRIMARY_BOOT},
+       {"secondary",   MAKE_CFGVAL_SECONDARY_BOOT},
        {NULL,          0},
 };
 #endif
-- 
2.28.0