When testing builds provided in https://github.com/openwrt/openwrt/pull/3360 I discovered that fdtfile was not set and as a result the firmware was not functional. So I am documenting what is needed.
Signed-off-by: Dennis Gilmore <den...@ausil.us> Cc: Atish Patra <atish.pa...@wdc.com> Cc: Lukas Auer <lukas.a...@aisec.fraunhofer.de> Cc: Tom Rini <tr...@konsulko.com> Cc: Masahiro Yamada <yamada.masah...@socionext.com> Cc: Vagrant Cascadian <vagr...@debian.org> Cc: Stephen Warren <swar...@nvidia.com> Cc: Karsten Merker <mer...@debian.org> --- doc/README.distro | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/doc/README.distro b/doc/README.distro index 5076bebd18..3eb70aeb14 100644 --- a/doc/README.distro +++ b/doc/README.distro @@ -224,6 +224,14 @@ fdt_addr_r: A size of 1MB for the FDT/DTB seems reasonable. +fdtfile: + + Mandatory. the name of the DTB file for the specific board for instance + the espressobin v5 board the value is "marvell/armada-3720-espressobin.dtb" + while on a clearfog pro it is "armada-388-clearfog-pro.dtb" in the case of + a board providing its firmware based DTB this value can be used to override + the DTB with a different DTB. + ramdisk_addr_r: Mandatory. The location in RAM where the initial ramdisk will be loaded to -- 2.28.0
