Le 19/09/2010 08:04, Heiko Schocher a écrit : > Hello Wolfgang, > > Wolfgang Denk wrote: >> Dear Albert ARIBAUD, >> >> In message<4c953ec4.2090...@free.fr> you wrote: >>>> +#if defined(CONFIG_BOARD_EARLY_INIT_F) >>>> + board_early_init_f, >>>> +#endif >>>> + timer_init, /* initialize timer */ >>>> +#ifdef CONFIG_FSL_ESDHC >>>> + get_clocks, >>>> +#endif >>>> + env_init, /* initialize environment */ >>>> + init_baudrate, /* initialze baudrate settings */ >>>> + serial_init, /* serial communications setup */ >>>> + console_init_f, /* stage 1 init of console */ >>>> + display_banner, /* say that we are here */ >>>> +#if defined(CONFIG_DISPLAY_CPUINFO) >>>> + print_cpuinfo, /* display cpu info (and speed) */ >>>> +#endif >>>> +#if defined(CONFIG_DISPLAY_BOARDINFO) >>>> + checkboard, /* display board info */ >>>> +#endif >>>> +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) >>>> + init_func_i2c, >>>> +#endif >>>> + dram_init, /* configure available RAM banks */ >>>> +#if defined(CONFIG_CMD_PCI) || defined (CONFIG_PCI) >>>> + arm_pci_init, >>>> +#endif >>>> + NULL, >>>> +}; >>> Are all these inits really required at board_init_f stage? I understand >> >> Good question... >> >>> initializing the console in order to print out diagnostic and error >>> messages before RAM is initialized, and I understand initializing RAM of >>> course, but are I2C or PCI init needed before relocation? Can't they >>> wait until board_init_r? >> >> I2C may be needed for example if you have the environment stored in a >> I2C EEPROM - but then this is needed before init_baudrate ... > > or for reading SPD EEprom for DDR setup ... > >> CONFIG_PCI - I don't think this is used at all by any ARM board yet. >> >> >> My understanding is that Heiko might be preparing arch/arm/lib/board.c >> for merging with arch/powerpc/lib/board.c ... > > Indeed, I copied this from arch/powerpc/lib/board.c and added > arm specific code. I think goal should be, that we can make a > arch/generic/lib/board.c ... ? > > bye, > Heiko
Thanks, that clarifies it. Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
