On 28/08/2020 10:18, Andre Heider wrote:
Hi Marek,
On 19/08/2020 11:57, Marek Behún wrote:
This commit fixes initialization of COMPHY on EspressoBin.
Commit 22f418935be4 ("phy: marvell: a3700: Use comphy_mux on Armada
37xx.") introduced usage of comphy_mux on Armada 37xx comphy driver.
The lanes are defined in comphy_a3700.c as described in functional
specification, that is:
lane 0 is SGMII1 or USB3
lane 1 is PCIe or SGMII0
lane 2 is SATA or USB3
But the DTS for EspressoBin configures PCIe on lane 0 and USB3 on
lane 1, which is wrong in the sense of the specification and doesn't
work with the comphy_mux code, which is 2 years now (the aardvark driver
causes synchronous abort in U-Boot).
It worked till the above mentioned commit, because the code for powering
up PCIe PHY doesn't work with lane number at all, and the code for
powering up USB3 PHY works differently only if USB3 is on lane 2, ie.
the check goes like:
if (lane == 2)
something
else
something else
so it does not differentiate between lanes 0 and 1.
In the future I shall post patches that remove the comphy_a3700 driver
and add comphy driver which uses calls to ATF, like Linux' driver does.
This will have the advantage of same DTS bindings as Linux', but till
this is done, we need this patch.
Signed-off-by: Marek Behún <marek.be...@nic.cz>
Tested-by: Pali Rohár <p...@kernel.org>
Cc: Stefan Roese <s...@denx.de>
now that I have a working mainline firmware, I think I have a related
problem: my sata ssd doesn't get detected, I just get this:
TIM-1.0
WTMI-devel-18.12.1-
WTMI: system early-init
CPU VDD voltage default value: 1.108V
NOTICE: Booting Trusted Firmware
NOTICE: BL1: v2.3(): (Marvell-devel-18.12.0)
NOTICE: BL1: Built : 06:12:46, Aug 26 2020
NOTICE: BL1: Booting BL2
NOTICE: BL2: v2.3(): (Marvell-devel-18.12.0)
NOTICE: BL2: Built : 06:12:46, Aug 26 2020
NOTICE: BL1: Booting BL31
NOTICE: BL31: v2.3(): (Marvell-devel-18.12.0)
NOTICE: BL31: Built : 06:12:46
U-Boot 2020.07 (Aug 26 2020 - 06:12:46 +0000)
DRAM: 1 GiB
Comphy-0: USB3_HOST0 5 Gbps
Comphy-1: PEX0 2.5 Gbps
Comphy-2: SATA0 5 Gbps
SATA link 0 timeout.
Any idea what's missing here? Do you think this may also be comphy related?
Please cc: me on your comphy/atf patches, I'd be willing to test those!
Nevermind, Pali figured it out:
https://patchwork.ozlabs.org/project/uboot/patch/20200828145629.540954-1-a.hei...@gmail.com/
Regards,
Andre