Hi Soeren, On Thu, Aug 27, 2020 at 4:53 PM Soeren Moch <sm...@web.de> wrote: > > According to doc/README.distro fdt_addr must not be set when DTB is not > available from hardware. So remove this entry. > > Use address 32MB above the start of DRAM for kernel_addr_r. This way > we likely can avoid the self-relocation of the compressed kernel image > before it decompresses to offset 0x8000 from start of DRAM. > > Use address 128MB above the start of DRAM for fdt_addr_r, since this is > the maximum location for the end of the kernel. So we avoid overwriting > the DTB. > > Use 512k above that for ramdisk_addr_r. This should be enough for the > DTB, rest of DRAM can be used for initrd. > > Place boot script / extlinux.conf at offset 0 / 1MB from start of DRAM. > This space is available for processing in U-Boot. > > Signed-off-by: Soeren Moch <sm...@web.de>
Reviewed-by: Fabio Estevam <feste...@gmail.com>
