From: Saeed Nowshadi <saeed.nowsh...@xilinx.com>

Value of shunt resistor for INA226s that monitor VCCINT and VCC_SOC power
rails are incorrect.  This patch corrects those values.

Signed-off-by: Saeed Nowshadi <saeed.nowsh...@xilinx.com>
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---

 arch/arm/dts/zynqmp-e-a2197-00-revA.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/dts/zynqmp-e-a2197-00-revA.dts 
b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts
index b81919e31948..aae3c626f562 100644
--- a/arch/arm/dts/zynqmp-e-a2197-00-revA.dts
+++ b/arch/arm/dts/zynqmp-e-a2197-00-revA.dts
@@ -230,16 +230,16 @@
                                #io-channel-cells = <1>;
                                label = "ina226-vccint";
                                reg = <0x40>;
-                               shunt-resistor = <5000>; /* R440 */
-                               /* 0.78V @ 32A 1 of 6 Phases*/
+                               shunt-resistor = <500>; /* R440 */
+                               /* 0.80V @ 32A 1 of 6 Phases*/
                        };
                        vcc_soc: ina226@41 { /* u161 */
                                compatible = "ti,ina226";
                                #io-channel-cells = <1>;
                                label = "ina226-vcc-soc";
                                reg = <0x41>;
-                               shunt-resistor = <2000>; /* R1186 */
-                               /* 0.78V @ 18A */
+                               shunt-resistor = <500>; /* R1702 */
+                               /* 0.80V @ 18A */
                        };
                        vcc_pmc: ina226@42 { /* u163 */
                                compatible = "ti,ina226";
-- 
2.28.0

Reply via email to