The J7200 SoCs has two R5F sub-systems. Enable the TI K3 R5F remoteproc driver and the remoteproc command options to allow these R5F processors to be booted from A72 U-Boot.
The Kconfigs are added using savedefconfig. Signed-off-by: Suman Anna <s-a...@ti.com> --- configs/j7200_evm_a72_defconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig index 6e854648eb45..52440a09a647 100644 --- a/configs/j7200_evm_a72_defconfig +++ b/configs/j7200_evm_a72_defconfig @@ -4,6 +4,7 @@ CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_NR_DRAM_BANKS=2 CONFIG_SOC_K3_J721E=y CONFIG_TARGET_J7200_A72_EVM=y CONFIG_ENV_SIZE=0x20000 @@ -16,7 +17,6 @@ CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_SPL_STACK_R_ADDR=0x82000000 -CONFIG_NR_DRAM_BANKS=2 CONFIG_ENV_OFFSET_REDUND=0x6A0000 CONFIG_SPL_FS_FAT=y CONFIG_SPL_LIBDISK_SUPPORT=y @@ -61,6 +61,7 @@ CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_MTD=y +CONFIG_CMD_REMOTEPROC=y CONFIG_CMD_UFS=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y @@ -140,6 +141,7 @@ CONFIG_POWER_DOMAIN=y CONFIG_TI_SCI_POWER_DOMAIN=y CONFIG_RAM=y CONFIG_SPL_RAM=y +CONFIG_REMOTEPROC_TI_K3_R5F=y CONFIG_DM_RESET=y CONFIG_RESET_TI_SCI=y CONFIG_SCSI=y -- 2.28.0
