Hi Andrew,
(added Weijie to Cc)
On 12.08.20 09:18, Andrii Voloshyn wrote:
Hi there,
There is one issue, I experience with (U-Boot 2020.07) on MT7628DAN, "reset" command issued in hush prompt
causes board to hang, until I do a power cycle. On the other hand there is
no such issue on mt7688 board.
Do you see no further output? Or is it perhaps stuck at the DDR init
code in SPL? Can you please post the log (complete boot log with reset
command)?
What's interesting, is that "reboot" issued in Linux shell makes board
reboot as expected on mt7628 board.
It seems like some sort of configuration issue, but I couldn't find anything specific in the datasheet. Maybe
you have some idea what could cause it?
One more thing, when running the following version of bootloader (https://github.com/gnubee-git/GnuBee-MT76x8-uboot)
"reset" command works as expected.
I do not have a MT7628 based board, so I can't test. Perhaps Weijie has
an idea?
Thanks,
Stefan
