There is no reason to bind psci driver if U-Boot runs in EL3 because
SMC/HVC instructions can't be called. That's why detect this state and
don't let user to crash from prompt by performing reset or poweroff
commands (if enabled).
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---
Maybe there is a better way how to do it. Maybe do it in probe instead of
bind. Feel free to comment but this doesn't look right behavior.
U-Boot SPL 2020.10-rc1-00046-g5fade0c9d867 (Aug 05 2020 - 14:36:03 +0200)
PMUFW: v1.1
Loading new PMUFW cfg obj (2024 bytes)
EL Level: EL3
Multiboot: 0
Trying to boot from MMC2
spl: could not initialize mmc. error: -19
Trying to boot from MMC1
spl_load_image_fat_os: error reading image u-boot.bin, err - -2
U-Boot 2020.10-rc1-00046-g5fade0c9d867 (Aug 05 2020 - 14:36:03 +0200)
Model: ZynqMP ZCU104 RevC
Board: Xilinx ZynqMP
DRAM: 2 GiB
PMUFW: v1.1
EL Level: EL3
Chip ID: zu7e
Multiboot: 0
WDT: Started with servicing (60s timeout)
NAND: 0 MiB
MMC: mmc@ff170000: 0
In: serial@ff000000
Out: serial@ff000000
Err: serial@ff000000
Bootmode: LVL_SHFT_SD_MODE1
Reset reason: EXTERNAL
Net:
ZYNQ GEM: ff0e0000, mdio bus ff0e0000, phyaddr 12, interface rgmii-id
eth0: ethernet@ff0e0000
Hit any key to stop autoboot: 0
ZynqMP>
ZynqMP> reset
resetting ...
"Synchronous Abort" handler, esr 0x5e000000
elr: 0000000008000194 lr : 0000000008000220 (reloc)
elr: 000000007fec9194 lr : 000000007fec9220
x0 : 0000000084000009 x1 : 0000000000000000
x2 : 0000000000000000 x3 : 0000000000000000
x4 : 0000000000000000 x5 : 0000000000000000
x6 : 0000000000000000 x7 : 0000000000000000
x8 : 000000007deaedb0 x9 : 000000000000000c
x10: 00000000000007c4 x11: 000000007deae92c
x12: 0000000000000006 x13: 000000000001869f
x14: 000000007deaedb0 x15: 0000000000000002
x16: 000000007ff2af5c x17: 0000000000000000
x18: 000000007deb8db0 x19: 0000000000000000
x20: 000000007ffb0268 x21: 0000000000000000
x22: 000000007debc600 x23: 0000000000000001
x24: 000000007ffc7898 x25: 0000000000000000
x26: 0000000000000000 x27: 0000000000000000
x28: 000000007debc640 x29: 000000007deaeaf0
Code: 00000000 f9020000 00000000 d4000003 (f94003e4)
Resetting CPU ...
### ERROR ### Please RESET the board ###
---
drivers/firmware/psci.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/firmware/psci.c b/drivers/firmware/psci.c
index 23cf807591c4..1bef7eea56fc 100644
--- a/drivers/firmware/psci.c
+++ b/drivers/firmware/psci.c
@@ -69,6 +69,9 @@ static int psci_probe(struct udevice *dev)
{
const char *method;
+ if (current_el() == 3)
+ return -EINVAL;
+
method = ofnode_read_string(dev_ofnode(dev), "method");
if (!method) {
pr_warn("missing \"method\" property\n");
--
2.27.0
