[PATCH 4/8] xilinx: zynqmp: get chip ID at EL3

[Michal Simek]

From: Ibai Erkiaga <ibai.erkiaga-elo...@xilinx.com>

Modify the board init function to allow getting the chip ID when U-Boot
proper is executed at EL3.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elo...@xilinx.com>
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---

 board/xilinx/zynqmp/zynqmp.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index cf5febc4c41c..2b95a61dd0aa 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -362,12 +362,10 @@ int board_init(void)
 #if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
     !defined(CONFIG_SPL_BUILD) || (defined(CONFIG_SPL_FPGA_SUPPORT) && \
     defined(CONFIG_SPL_BUILD))
-       if (current_el() != 3) {
-               zynqmppl.name = zynqmp_get_silicon_idcode_name();
-               printf("Chip ID:\t%s\n", zynqmppl.name);
-               fpga_init();
-               fpga_add(fpga_xilinx, &zynqmppl);
-       }
+       zynqmppl.name = zynqmp_get_silicon_idcode_name();
+       printf("Chip ID:\t%s\n", zynqmppl.name);
+       fpga_init();
+       fpga_add(fpga_xilinx, &zynqmppl);
 #endif
 
        if (current_el() == 3)
-- 
2.27.0