[PATCH v2 3/6] gpio: mxc_gpio: add OF_PLATDATA support

[Walter Lozano]

Continuing with the OF_PLATADATA support for iMX6 to reduce SPL
footprint, add it to mxc_gpio. Thanks to this, it will be possible to
enable card detection on MMC driver.

Signed-off-by: Walter Lozano <walter.loz...@collabora.com>
---

(no changes since v1)

 drivers/gpio/mxc_gpio.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
index 316dcc757b..fc49b5b577 100644
--- a/drivers/gpio/mxc_gpio.c
+++ b/drivers/gpio/mxc_gpio.c
@@ -13,6 +13,8 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
+#include <dt-structs.h>
+#include <mapmem.h>
 
 enum mxc_gpio_direction {
        MXC_GPIO_DIRECTION_IN,
@@ -22,6 +24,10 @@ enum mxc_gpio_direction {
 #define GPIO_PER_BANK                  32
 
 struct mxc_gpio_plat {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+       /* Put this first since driver model will copy the data here */
+       struct dtd_gpio_mxc dtplat;
+#endif
        int bank_index;
        struct gpio_regs *regs;
 };
@@ -306,8 +312,16 @@ static int mxc_gpio_bind(struct udevice *dev)
         * is statically initialized in U_BOOT_DEVICES.Here
         * will return.
         */
-       if (plat)
+
+       if (plat) {
+#if CONFIG_IS_ENABLED(OF_PLATDATA)
+               struct dtd_gpio_mxc *dtplat = &plat->dtplat;
+
+               plat->regs = map_sysmem(dtplat->reg[0], dtplat->reg[1]);
+               plat->bank_index = dev->req_seq;
+#endif
                return 0;
+       }
 
        addr = devfdt_get_addr(dev);
        if (addr == FDT_ADDR_T_NONE)
@@ -350,6 +364,8 @@ U_BOOT_DRIVER(gpio_mxc) = {
        .bind   = mxc_gpio_bind,
 };
 
+U_BOOT_DRIVER_ALIAS(gpio_mxc, fsl_imx6q_gpio)
+
 #if !CONFIG_IS_ENABLED(OF_CONTROL)
 static const struct mxc_gpio_plat mxc_plat[] = {
        { 0, (struct gpio_regs *)GPIO1_BASE_ADDR },
-- 
2.20.1