> From: Suneel Garapati <sgarap...@marvell.com>
>
> Add support for GPIO controllers found on Octeon II/III and Octeon TX
> TX2 SoC platforms.
>
> Signed-off-by: Aaron Williams <awilli...@marvell.com>
> Signed-off-by: Suneel Garapati <sgarap...@marvell.com>
> Signed-off-by: Stefan Roese <s...@denx.de>
> Cc: Simon Glass <s...@chromium.org>
> Cc: Daniel Schwierzeck <daniel.schwierz...@gmail.com>
> Cc: Aaron Williams <awilli...@marvell.com>
> Cc: Chandrakala Chavva <ccha...@marvell.com>
> ---
> v2 (Stefan):
> - Removed #ifdef's for Octeon vs OcteonTX/TX2 completely
> The differentiation is now made via driver data / compatible
> string
>
> RFC -> v1 (Stefan)
> - Separated this patch from the OcteonTX/TX2 RFC patch series into a
> single patch. This is useful, as the upcoming MIPS Octeon support will
> use this GPIO driver.
> - Added MIPS Octeon II/III support (big endian). Rename driver and its
> function names from "octeontx" to "octeon" to better match all Octeon
> platforms.
> - Moved from union to defines / bitmasks. This makes the driver usage
> on little- and big-endian platforms much easier.
> - Used clrbits_64() instead of clrbits_le64() and friends to support
> usage on little- and big-endian systems
> - Removed dev->req_seq assignment
> - Enhanced Kconfig text
> - Rewrote GPIO_BIT macro
> - Dropped many macros to calculate the registers offsets and implemented
> simple functions for this (easier to read)
> - Used GENMASK_ULL and FIELD_GET helpers
> - Minor cosmetic changes (dropped brackets etc)
> - Reword commit text and subject
>
> drivers/gpio/Kconfig | 10 ++
> drivers/gpio/Makefile | 1 +
> drivers/gpio/octeon_gpio.c | 253 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 264 insertions(+)
> create mode 100644 drivers/gpio/octeon_gpio.c
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index d87f6cc105..451896f400 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -316,6 +316,16 @@ config PIC32_GPIO
> help
> Say yes here to support Microchip PIC32 GPIOs.
>
> +config OCTEON_GPIO
> + bool "Octeon II/III/TX/TX2 GPIO driver"
> + depends on DM_GPIO && (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
> + default y
> + help
> + Add support for the Marvell Octeon GPIO driver. This is used with
> + various Octeon parts such as Octeon II/III and OcteonTX/TX2.
> + Octeon II/III has 32 GPIOs (count defined via DT) and OcteonTX/TX2
> + has 64 GPIOs (count defined via internal register).
> +
> config STM32_GPIO
> bool "ST STM32 GPIO driver"
> depends on DM_GPIO && (ARCH_STM32 || ARCH_STM32MP)
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 7638259007..eb6364adb4 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -58,6 +58,7 @@ obj-$(CONFIG_HIKEY_GPIO) += hi6220_gpio.o
> obj-$(CONFIG_HSDK_CREG_GPIO) += hsdk-creg-gpio.o
> obj-$(CONFIG_IMX_RGPIO2P) += imx_rgpio2p.o
> obj-$(CONFIG_PIC32_GPIO) += pic32_gpio.o
> +obj-$(CONFIG_OCTEON_GPIO) += octeon_gpio.o
> obj-$(CONFIG_MVEBU_GPIO) += mvebu_gpio.o
> obj-$(CONFIG_MSM_GPIO) += msm_gpio.o
> obj-$(CONFIG_$(SPL_)PCF8575_GPIO) += pcf8575_gpio.o
> diff --git a/drivers/gpio/octeon_gpio.c b/drivers/gpio/octeon_gpio.c
> new file mode 100644
> index 0000000000..d7ac9a1910
> --- /dev/null
> +++ b/drivers/gpio/octeon_gpio.c
> @@ -0,0 +1,253 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018 Marvell International Ltd.
> + *
> + * (C) Copyright 2011
> + * eInfochips Ltd. <www.einfochips.com>
> + * Written-by: Ajay Bhargav <ajay.bhar...@einfochips.com>
> + *
> + * (C) Copyright 2010
> + * Marvell Semiconductor <www.marvell.com>
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <errno.h>
> +#include <fdtdec.h>
> +#include <pci_ids.h>
> +#include <asm/bitops.h>
> +#include <asm/gpio.h>
> +#include <asm/io.h>
> +#include <linux/bitfield.h>
> +#include <linux/compat.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/* Returns the bit value to write or read based on the offset */
> +#define GPIO_BIT(x) BIT_ULL((x) & 0x3f)
> +
> +#define GPIO_RX_DAT 0x00
> +#define GPIO_TX_SET 0x08
> +#define GPIO_TX_CLR 0x10
> +#define GPIO_CONST 0x90 /* OcteonTX only */
> +
> +/* Offset to register-set for 2nd GPIOs (> 63), OcteonTX only */
> +#define GPIO1_OFFSET 0x1400
> +
> +/* GPIO_CONST register bits */
> +#define GPIO_CONST_GPIOS_MASK GENMASK_ULL(7, 0)
> +
> +/* GPIO_BIT_CFG register bits */
> +#define GPIO_BIT_CFG_TX_OE BIT_ULL(0)
> +#define GPIO_BIT_CFG_PIN_XOR BIT_ULL(1)
> +#define GPIO_BIT_CFG_INT_EN BIT_ULL(2)
> +#define GPIO_BIT_CFG_PIN_SEL_MASK GENMASK_ULL(26, 16)
> +
> +enum {
> + PROBE_PCI = 0, /* PCI based probing */
> + PROBE_DT, /* DT based probing */
> +};
> +
> +struct octeon_gpio_data {
> + int probe;
> + u32 reg_offs;
> + u32 gpio_bit_cfg_offs;
> +};
> +
> +struct octeon_gpio {
> + void __iomem *base;
> + const struct octeon_gpio_data *data;
> +};
> +
> +/* Returns the offset to the output register based on the offset and value */
> +static u32 gpio_tx_reg(int offset, int value)
> +{
> + u32 ret;
> +
> + ret = value ? GPIO_TX_SET : GPIO_TX_CLR;
> + if (offset > 63)
> + ret += GPIO1_OFFSET;
> +
> + return ret;
> +}
> +
> +/* Returns the offset to the input data register based on the offset */
> +static u32 gpio_rx_dat_reg(int offset)
> +{
> + u32 ret;
> +
> + ret = GPIO_RX_DAT;
> + if (offset > 63)
> + ret += GPIO1_OFFSET;
> +
> + return ret;
> +}
> +
> +static int octeon_gpio_dir_input(struct udevice *dev, unsigned int offset)
> +{
> + struct octeon_gpio *gpio = dev_get_priv(dev);
> +
> + debug("%s(%s, %u)\n", __func__, dev->name, offset);
> + clrbits_64(gpio->base + gpio->data->gpio_bit_cfg_offs + 8 * offset,
> + GPIO_BIT_CFG_TX_OE | GPIO_BIT_CFG_PIN_XOR |
> + GPIO_BIT_CFG_INT_EN | GPIO_BIT_CFG_PIN_SEL_MASK);
> +
> + return 0;
> +}
> +
> +static int octeon_gpio_dir_output(struct udevice *dev, unsigned int offset,
> + int value)
> +{
> + struct octeon_gpio *gpio = dev_get_priv(dev);
> +
> + debug("%s(%s, %u, %d)\n", __func__, dev->name, offset, value);
> + writeq(GPIO_BIT(offset), gpio->base + gpio->data->reg_offs +
> + gpio_tx_reg(offset, value));
> +
> + clrsetbits_64(gpio->base + gpio->data->gpio_bit_cfg_offs + 8 * offset,
> + GPIO_BIT_CFG_PIN_SEL_MASK | GPIO_BIT_CFG_INT_EN,
> + GPIO_BIT_CFG_TX_OE);
> +
> + return 0;
> +}
> +
> +static int octeon_gpio_get_value(struct udevice *dev, unsigned int offset)
> +{
> + struct octeon_gpio *gpio = dev_get_priv(dev);
> + u64 reg = readq(gpio->base + gpio->data->reg_offs +
> + gpio_rx_dat_reg(offset));
> +
> + debug("%s(%s, %u): value: %d\n", __func__, dev->name, offset,
> + !!(reg & GPIO_BIT(offset)));
> +
> + return !!(reg & GPIO_BIT(offset));
> +}
> +
> +static int octeon_gpio_set_value(struct udevice *dev,
> + unsigned int offset, int value)
> +{
> + struct octeon_gpio *gpio = dev_get_priv(dev);
> +
> + debug("%s(%s, %u, %d)\n", __func__, dev->name, offset, value);
> + writeq(GPIO_BIT(offset), gpio->base + gpio->data->reg_offs +
> + gpio_tx_reg(offset, value));
> +
> + return 0;
> +}
> +
> +static int octeon_gpio_get_function(struct udevice *dev, unsigned int offset)
> +{
> + struct octeon_gpio *gpio = dev_get_priv(dev);
> + u64 val = readq(gpio->base + gpio->data->gpio_bit_cfg_offs +
> + 8 * offset);
> + int pin_sel;
> +
> + debug("%s(%s, %u): GPIO_BIT_CFG: 0x%llx\n", __func__, dev->name,
> + offset, val);
> + pin_sel = FIELD_GET(GPIO_BIT_CFG_PIN_SEL_MASK, val);
> + if (pin_sel)
> + return GPIOF_FUNC;
> + else if (val & GPIO_BIT_CFG_TX_OE)
> + return GPIOF_OUTPUT;
> + else
> + return GPIOF_INPUT;
> +}
> +
> +static int octeon_gpio_xlate(struct udevice *dev, struct gpio_desc *desc,
> + struct ofnode_phandle_args *args)
> +{
> + if (args->args_count < 1)
> + return -EINVAL;
> +
> + desc->offset = args->args[0];
> + desc->flags = 0;
> + if (args->args_count > 1) {
> + if (args->args[1] & GPIO_ACTIVE_LOW)
> + desc->flags |= GPIOD_ACTIVE_LOW;
> + /* In the future add tri-state flag support */
> + }
> + return 0;
> +}
> +
> +static const struct dm_gpio_ops octeon_gpio_ops = {
> + .direction_input = octeon_gpio_dir_input,
> + .direction_output = octeon_gpio_dir_output,
> + .get_value = octeon_gpio_get_value,
> + .set_value = octeon_gpio_set_value,
> + .get_function = octeon_gpio_get_function,
> + .xlate = octeon_gpio_xlate,
> +};
> +
> +static int octeon_gpio_probe(struct udevice *dev)
> +{
> + struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
> + struct octeon_gpio *priv = dev_get_priv(dev);
> + char *end;
> +
> + priv->data = (const struct octeon_gpio_data *)dev_get_driver_data(dev);
> +
> + if (priv->data->probe == PROBE_PCI) {
> + priv->base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0,
> + PCI_REGION_MEM);
> + uc_priv->gpio_count = readq(priv->base +
> + priv->data->reg_offs + GPIO_CONST) &
> + GPIO_CONST_GPIOS_MASK;
> + } else {
> + priv->base = dev_remap_addr(dev);
> + uc_priv->gpio_count = ofnode_read_u32_default(dev->node,
> + "nr-gpios", 32);
> + }
> +
> + if (!priv->base) {
> + debug("%s(%s): Could not get base address\n",
> + __func__, dev->name);
> + return -ENODEV;
> + }
> +
> + uc_priv->bank_name = strdup(dev->name);
> + end = strchr(uc_priv->bank_name, '@');
> + end[0] = 'A' + dev->seq;
> + end[1] = '\0';
> +
> + debug("%s(%s): base address: %p, pin count: %d\n",
> + __func__, dev->name, priv->base, uc_priv->gpio_count);
> +
> + return 0;
> +}
> +
> +static const struct octeon_gpio_data gpio_octeon_data = {
> + .probe = PROBE_DT,
> + .reg_offs = 0x80,
> + .gpio_bit_cfg_offs = 0x100,
> +};
> +
> +static const struct octeon_gpio_data gpio_octeontx_data = {
> + .probe = PROBE_PCI,
> + .reg_offs = 0x00,
> + .gpio_bit_cfg_offs = 0x400,
> +};
> +
> +static const struct udevice_id octeon_gpio_ids[] = {
> + { .compatible = "cavium,thunder-8890-gpio",
> + .data = (ulong)&gpio_octeontx_data },
> + { .compatible = "cavium,octeon-7890-gpio",
> + .data = (ulong)&gpio_octeon_data },
> + { }
> +};
> +
> +U_BOOT_DRIVER(octeon_gpio) = {
> + .name = "octeon_gpio",
> + .id = UCLASS_GPIO,
> + .of_match = of_match_ptr(octeon_gpio_ids),
> + .probe = octeon_gpio_probe,
> + .priv_auto_alloc_size = sizeof(struct octeon_gpio),
> + .ops = &octeon_gpio_ops,
> + .flags = DM_FLAG_PRE_RELOC,
> +};
> +
> +static struct pci_device_id octeon_gpio_supported[] = {
> + { PCI_VDEVICE(CAVIUM, PCI_DEVICE_ID_CAVIUM_GPIO),
> + .driver_data = (ulong)&gpio_octeontx_data },
> + { },
> +};
I can't build that with the Octeon base support because
PCI_VENDOR_ID_CAVIUM and PCI_DEVICE_ID_CAVIUM_GPIO are missing in U-
Boot's include/pci_ids.h. I can only find PCI_VENDOR_ID_CAVIUM in Linux
but not PCI_DEVICE_ID_CAVIUM_GPIO.
> +
> +U_BOOT_PCI_DEVICE(octeon_gpio, octeon_gpio_supported);
--
- Daniel
