N900 again, sorry. ----- Původní zpráva ----- > Dear Marek Vasut, > > In message <1282296691-15910-6-git-send-email-marek.va...@gmail.com> you > wrote: > > 128MB NOR module support. > > Define __io to get harddrive working. > > Fix saving of environment into OneNAND. > > Boot from harddrive when possible. > > Add missing MAINTAINERS entry. > > > > Signed-off-by: Marek Vasut <marek.va...@gmail.com> > > --- > > Changes same as in PalmTC > > > > MAINTAINERS | 1 + > > MAKEALL | 3 +- > > Makefile | 7 ++- > > board/vpac270/Makefile | 7 +-- > > board/vpac270/lowlevel_init.S | 1 - > > board/vpac270/vpac270.c | 41 ++++++---------- > > include/configs/vpac270.h | 106 > > +++++++++++++++++++++++----------------- 7 files changed, 87 > > insertions(+), 79 deletions(-) > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 5d20dca..c35a277 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -800,6 +800,7 @@ Marek Vasut <marek.va...@gmail.com> > > > > palmld xscale > > palmtc xscale > > + vpac270 xscale > > > > Hugo Villeneuve <hugo.villene...@lyrtech.com> > > > > diff --git a/Makefile b/Makefile > > index 4f1cb1b..3f2b304 100644 > > --- a/Makefile > > +++ b/Makefile > > @@ -2180,13 +2180,18 @@ trizepsiv_config : unconfig > > fi; > > @$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv > > > > -vpac270_nor_config \ > > +vpac270_nor_256M_config \ > > +vpac270_nor_128M_config \ > > vpac270_onenand_config : unconfig > > Um... we don't accept such changes to the Makefile any more. Such > configuration should be moved to the boards.cfg file instead.
I'm aware of this. Though I have to admit I don't know how to do it through boards.cfg. I will take a look when I get home (in about 1 hour). Or if you'd be so kind to point me in some direction? Thanks > > ... > > --- a/board/vpac270/Makefile > > +++ b/board/vpac270/Makefile > > @@ -1,10 +1,7 @@ > > - > > # > > -# (C) Copyright 2000 > > -# Wolfgang Denk, DENX Software Engineering, w...@denx.de. > > +# Voipac PXA270 Support > > # > > -# See file CREDITS for list of people who contributed to this > > -# project. > > +# Copyright (C) 2010 Marek Vasut <marek.va...@gmail.com> > > # > > # This program is free software; you can redistribute it and/or > > # modify it under the terms of the GNU General Public License as > ... > > diff --git a/board/vpac270/vpac270.c b/board/vpac270/vpac270.c > > index 18e47e2..2d01e22 100644 > > --- a/board/vpac270/vpac270.c > > +++ b/board/vpac270/vpac270.c > > @@ -1,16 +1,7 @@ > > /* > > - * (C) Copyright 2004 > > - * Robert Whaley, Applied Data Systems, Inc. rwha...@applieddata.net > > + * Voipac PXA270 Support > > * > > - * (C) Copyright 2002 > > - * Kyle Harris, Nexus Technologies, Inc. khar...@nexus-tech.net > > - * > > - * (C) Copyright 2002 > > - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> > > - * Marius Groeger <mgroe...@sysgo.de> > > - * > > - * See file CREDITS for list of people who contributed to this > > - * project. > > + * Copyright (C) 2010 Marek Vasut <marek.va...@gmail.com> > > What makes you think it was legitimate to delete these old Copyright > notices? > > > Best regards, > > Wolfgang Denk > > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de > HEALTH WARNING: Care Should Be Taken When Lifting This Product, Since > Its Mass, and Thus Its Weight, Is Dependent on Its Velocity Relative > to the User. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
