From: Jan Kiszka <jan.kis...@siemens.com>
Buiding u-boot-spl-k3[_HS].its is currently unconditionally verbose
about what it does. Change that by wrapping the call to k3_fit_atf.sh
into a cmd, also using that chance to reduce duplicate lines of makefile
code - only IS_HS=1 is different when CONFIG_TI_SECURE_DEVICE is on.
Signed-off-by: Jan Kiszka <jan.kis...@siemens.com>
Acked-by: Lokesh Vutla <lokeshvu...@ti.com>
---
Change in v2:
- add a commit message
arch/arm/mach-k3/config.mk | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-k3/config.mk b/arch/arm/mach-k3/config.mk
index f6b63db349..f7afef610c 100644
--- a/arch/arm/mach-k3/config.mk
+++ b/arch/arm/mach-k3/config.mk
@@ -48,22 +48,23 @@ ALL-y += tiboot3.bin
endif
ifdef CONFIG_ARM64
+
ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
SPL_ITS := u-boot-spl-k3_HS.its
-$(SPL_ITS): FORCE
- IS_HS=1 \
- $(srctree)/tools/k3_fit_atf.sh \
- $(patsubst %,$(obj)/dts/%.dtb,$(subst ",,$(CONFIG_SPL_OF_LIST))) > $@
-
+$(SPL_ITS): export IS_HS=1
ALL-y += tispl.bin_HS
else
SPL_ITS := u-boot-spl-k3.its
-$(SPL_ITS): FORCE
+ALL-y += tispl.bin
+endif
+
+quiet_cmd_k3_mkits = MKITS $@
+cmd_k3_mkits = \
$(srctree)/tools/k3_fit_atf.sh \
$(patsubst %,$(obj)/dts/%.dtb,$(subst ",,$(CONFIG_SPL_OF_LIST))) > $@
-ALL-y += tispl.bin
-endif
+$(SPL_ITS): FORCE
+ $(call cmd,k3_mkits)
endif
else
--
2.26.2
