On 09/05/20 4:18 pm, Adam Ford wrote: > With the converstion of SMC911x to DM, this can facilitate the omap3 > boards from LogicPD (now called Beacon EmbeddedWorks) to be converted. > There isn't a clean solution to doing this in phases, so the boards are > all being done together to avoid breaking functionality. > > Because the GPMC bus hasn't been converted, the -u-boot.dtsi node needs > to show the address of the ethernet controller for each board. > > The board file, which is common betwen the OMAP35 and DM37 SOM LV and > Torpedo boards, can remove the manual ethernet initialization, but it > still needs to register the address and GPMC configuration for the Ethernet > controller which is now being moved around to board_late_init(). > > Lastly, this patch updates the various config files to add the reference > for DM_ETH and remove the SMC address, which is now fetched from the > newly created device tree nodes. > > Signed-off-by: Adam Ford <aford...@gmail.com> > --- > V2: Rebase on master, fix dtb warnings Applied to u-boot-ti next. Thanks and regards, Lokesh