Add configuration flag to select the supported dwc driver configuration:
- CONFIG_DWC_ETH_QOS_TEGRA186
- CONFIG_DWC_ETH_QOS_IMX
- CONFIG_DWC_ETH_QOS_STM32
See Linux driver ethernet/stmicro/stmmac and associated glue layers
for other configuration examples.
This patch removes the not-selected compatibles and lets the linker remove
the unused functions to reduce the size of the driver.
Signed-off-by: Patrick Delaunay <patrick.delau...@st.com>
---
Hi,
I propose this patch after Marek's remark in [1].
It is also linked to [2] to limit the STM32 glue for ST compatible.
[1] net: dwc_eth_qos: Make clk_rx and clk_tx optional
http://patchwork.ozlabs.org/project/uboot/patch/20200512095603.29126-5-david...@rock-chips.com/#2432595
[2] net: dwc_eth_qos: update the compatible supported for STM32
http://patchwork.ozlabs.org/project/uboot/list/?series=176917
drivers/net/Kconfig | 27 ++++++++++++++++++++++++---
drivers/net/dwc_eth_qos.c | 12 +++++++++---
2 files changed, 33 insertions(+), 6 deletions(-)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 0b08de0ef4..c4b3667d3b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -156,9 +156,30 @@ config DWC_ETH_QOS
help
This driver supports the Synopsys Designware Ethernet QOS (Quality
Of Service) IP block. The IP supports many options for bus type,
- clocking/reset structure, and feature list. This driver currently
- supports the specific configuration used in NVIDIA's Tegra186 chip,
- but should be extensible to other combinations quite easily.
+ clocking/reset structure, and feature list.
+
+config DWC_ETH_QOS_IMX
+ bool "Synopsys DWC Ethernet QOS device support for IMX"
+ depends on DWC_ETH_QOS
+ help
+ The Synopsys Designware Ethernet QOS IP block with the specific
+ configuration used in IMX soc.
+
+config DWC_ETH_QOS_STM32
+ bool "Synopsys DWC Ethernet QOS device support for STM32"
+ depends on DWC_ETH_QOS
+ default y if ARCH_STM32MP
+ help
+ The Synopsys Designware Ethernet QOS IP block with the specific
+ configuration used in STM32MP soc.
+
+config DWC_ETH_QOS_TEGRA186
+ bool "Synopsys DWC Ethernet QOS device support for TEGRA186"
+ depends on DWC_ETH_QOS
+ default y if TEGRA186
+ help
+ The Synopsys Designware Ethernet QOS IP block with specific
+ configuration used in NVIDIA's Tegra186 chip.
config E1000
bool "Intel PRO/1000 Gigabit Ethernet support"
diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c
index 3f4437069b..d4536a325f 100644
--- a/drivers/net/dwc_eth_qos.c
+++ b/drivers/net/dwc_eth_qos.c
@@ -2100,7 +2100,7 @@ static struct eqos_ops eqos_tegra186_ops = {
.eqos_get_tick_clk_rate = eqos_get_tick_clk_rate_tegra186
};
-static const struct eqos_config eqos_tegra186_config = {
+static const struct eqos_config __maybe_unused eqos_tegra186_config = {
.reg_access_always_ok = false,
.mdio_wait = 10,
.swr_wait = 10,
@@ -2127,7 +2127,7 @@ static struct eqos_ops eqos_stm32_ops = {
.eqos_get_tick_clk_rate = eqos_get_tick_clk_rate_stm32
};
-static const struct eqos_config eqos_stm32_config = {
+static const struct eqos_config __maybe_unused eqos_stm32_config = {
.reg_access_always_ok = false,
.mdio_wait = 10000,
.swr_wait = 50,
@@ -2154,7 +2154,7 @@ static struct eqos_ops eqos_imx_ops = {
.eqos_get_tick_clk_rate = eqos_get_tick_clk_rate_imx
};
-struct eqos_config eqos_imx_config = {
+struct eqos_config __maybe_unused eqos_imx_config = {
.reg_access_always_ok = false,
.mdio_wait = 10000,
.swr_wait = 50,
@@ -2165,18 +2165,24 @@ struct eqos_config eqos_imx_config = {
};
static const struct udevice_id eqos_ids[] = {
+#if IS_ENABLED(CONFIG_DWC_ETH_QOS_TEGRA186)
{
.compatible = "nvidia,tegra186-eqos",
.data = (ulong)&eqos_tegra186_config
},
+#endif
+#if IS_ENABLED(CONFIG_DWC_ETH_QOS_STM32)
{
.compatible = "snps,dwmac-4.20a",
.data = (ulong)&eqos_stm32_config
},
+#endif
+#if IS_ENABLED(CONFIG_DWC_ETH_QOS_IMX)
{
.compatible = "fsl,imx-eqos",
.data = (ulong)&eqos_imx_config
},
+#endif
{ }
};
--
2.17.1
