On 2020/6/4 下午6:09, Heiko Stuebner wrote:
From: Heiko Stuebner <heiko.stueb...@theobroma-systems.com>
Tabs not spaces, so transform it to the common styling.
Signed-off-by: Heiko Stuebner <heiko.stueb...@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com>
Thanks,
- Kever
---
arch/arm/dts/rk3399-puma-u-boot.dtsi | 30 ++++++++++++++--------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/dts/rk3399-puma-u-boot.dtsi
b/arch/arm/dts/rk3399-puma-u-boot.dtsi
index 3ad1139833..ddb5fa6e76 100644
--- a/arch/arm/dts/rk3399-puma-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-puma-u-boot.dtsi
@@ -2,24 +2,24 @@
#include "rk3399-u-boot.dtsi"
/ {
- config {
- u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
- u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */
- u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
- u-boot,boot-led = "module_led";
- sysreset-gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
- };
+ config {
+ u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
+ u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */
+ u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
+ u-boot,boot-led = "module_led";
+ sysreset-gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
+ };
- chosen {
- stdout-path = "serial0:115200n8";
- u-boot,spl-boot-order = \
+ chosen {
+ stdout-path = "serial0:115200n8";
+ u-boot,spl-boot-order = \
"same-as-spl", &norflash, &sdhci, &sdmmc;
- };
+ };
- aliases {
- spi0 = &spi1;
- spi1 = &spi5;
- };
+ aliases {
+ spi0 = &spi1;
+ spi1 = &spi5;
+ };
/*
* The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
