Hi Heiko,
Could you use 'rockchip' instead of 'board' as prefix in the subject?
Thanks,
- Kever
On 2020/6/3 下午10:59, Heiko Stuebner wrote:
From: Heiko Stuebner <heiko.stueb...@theobroma-systems.com>
This revives the puma boards and makes them boot again with
mainline uboot.
Main points may be going back to the general fit script and
cleaning up the devicetree situation that got completely broken
by the recent sync from mainline linux.
Heiko Stuebner (6):
arm64: dts: rk3399-puma: fix gpio levels for gmac reset pin
board: puma: fix indentation for -u-boot.dtsi
board: puma: reorganize devicetrees to actually work and match
upstream
board: puma: fix indentation of misc_init_r
board: puma: allow building with TPL as well
board: puma: remove separate fit generator
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/rk3399-puma-ddr1333-u-boot.dtsi | 4 -
arch/arm/dts/rk3399-puma-ddr1333.dts | 8 -
arch/arm/dts/rk3399-puma-ddr1600-u-boot.dtsi | 4 -
arch/arm/dts/rk3399-puma-ddr1600.dts | 9 -
arch/arm/dts/rk3399-puma-ddr1866-u-boot.dtsi | 4 -
arch/arm/dts/rk3399-puma-ddr1866.dts | 8 -
arch/arm/dts/rk3399-puma-haikou.dts | 272 ++++++++++++++++++
arch/arm/dts/rk3399-puma-u-boot.dtsi | 43 +--
arch/arm/dts/rk3399-puma.dtsi | 2 +-
board/theobroma-systems/puma_rk3399/Kconfig | 15 +
.../puma_rk3399/fit_spl_atf.sh | 94 ------
.../puma_rk3399/puma-rk3399.c | 30 +-
configs/puma-rk3399_defconfig | 3 +-
14 files changed, 334 insertions(+), 166 deletions(-)
delete mode 100644 arch/arm/dts/rk3399-puma-ddr1333-u-boot.dtsi
delete mode 100644 arch/arm/dts/rk3399-puma-ddr1333.dts
delete mode 100644 arch/arm/dts/rk3399-puma-ddr1600-u-boot.dtsi
delete mode 100644 arch/arm/dts/rk3399-puma-ddr1600.dts
delete mode 100644 arch/arm/dts/rk3399-puma-ddr1866-u-boot.dtsi
delete mode 100644 arch/arm/dts/rk3399-puma-ddr1866.dts
create mode 100644 arch/arm/dts/rk3399-puma-haikou.dts
delete mode 100755 board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
