On 30.05.20 05:24, Denis 'GNUtoo' Carikli wrote: > This keeps the compatibility with the old bootcmd. > > The fdtfile environment variable also needed to be set to > imx6q-tbs2910.dtb to enable booting mainline kernels > otherwise with extlinux.conf it tries to load > mx6-tbs2910.dtb instead. > > With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola > GNU/Linux distribution, we have the following size > differences: > - text: +2041 bytes > - data: 0 bytes > - bss: 0 bytes > - total: +2041 bytes > > Signed-off-by: Denis 'GNUtoo' Carikli <gnu...@cyberdimension.org> Reviewed-by: Soeren Moch <sm...@web.de>
Thanks, Soeren > --- > Changelog since v4: > ------------------- > - Sorted EXTRA_ENV_SETTINGS alphabetically as requested > BOOTENV was also moved at the begining of > EXTRA_ENV_SETTINGS like on include/configs/colibri-imx8x.h > - Moved BOOT_TARGET_DEVICES at the end of the file as suggested > --- > configs/tbs2910_defconfig | 3 ++- > include/configs/tbs2910.h | 18 ++++++++++++++++++ > 2 files changed, 20 insertions(+), 1 deletion(-) > > diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig > index 9b25dcff5e..df5013e87c 100644 > --- a/configs/tbs2910_defconfig > +++ b/configs/tbs2910_defconfig > @@ -12,11 +12,12 @@ CONFIG_AHCI=y > CONFIG_ENV_VARS_UBOOT_CONFIG=y > CONFIG_BOOTDELAY=3 > CONFIG_USE_BOOTCOMMAND=y > -CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then run bootcmd_up2; > else run bootcmd_mmc; fi" > +CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then run bootcmd_up2; > else run bootcmd_mmc || run distro_bootcmd; fi" > CONFIG_USE_PREBOOT=y > CONFIG_PREBOOT="echo PCI:; pci enum; pci 1; usb start; if hdmidet; then run > set_con_hdmi; else run set_con_serial; fi" > CONFIG_PRE_CONSOLE_BUFFER=y > CONFIG_SUPPORT_RAW_INITRD=y > +CONFIG_DEFAULT_FDT_FILE="imx6q-tbs2910.dtb" > CONFIG_BOUNCE_BUFFER=y > CONFIG_BOARD_EARLY_INIT_F=y > CONFIG_HUSH_PARSER=y > diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h > index a230111251..17de122852 100644 > --- a/include/configs/tbs2910.h > +++ b/include/configs/tbs2910.h > @@ -76,6 +76,7 @@ > #define CONFIG_BOARD_SIZE_LIMIT 392192 /* (CONFIG_ENV_OFFSET - > 1024) */ > > #define CONFIG_EXTRA_ENV_SETTINGS \ > + BOOTENV \ > "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \ > "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \ > "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \ > @@ -92,6 +93,13 @@ > "bootm 0x10800000 0x10d00000\0" \ > "console=ttymxc0\0" \ > "fan=gpio set 92\0" \ > + "fdt_addr=0x13000000\0" \ > + "fdt_addr_r=0x13000000\0" \ > + "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ > + "kernel_addr_r=0x10008000\0" \ > + "pxefile_addr_r=0x10008000\0" \ > + "ramdisk_addr_r=0x18000000\0" \ > + "scriptaddr=0x14000000\0" \ > "set_con_serial=setenv stdout serial; " \ > "setenv stderr serial\0" \ > "set_con_hdmi=setenv stdout serial,vga; " \ > @@ -100,4 +108,14 @@ > "stdin=serial,usbkbd\0" \ > "stdout=serial,vga\0" > > +/* Enable distro boot */ > +#define BOOT_TARGET_DEVICES(func) \ > + func(MMC, mmc, 0) \ > + func(MMC, mmc, 1) \ > + func(MMC, mmc, 2) \ > + func(SATA, sata, 0) \ > + func(USB, usb, 0) > +#include <config_distro_bootcmd.h> > + > #endif /* __TBS2910_CONFIG_H * */
