Hi Bin, On Thu, 28 May 2020 at 03:26, Bin Meng <bmeng...@gmail.com> wrote: > > Hi Simon, > > When testing, I see "saveenv" does not work on Intel minnowmax. Do you > have any ideas? > > U-Boot 2020.07-rc3-00034-g0fd5234 (May 28 2020 - 15:34:45 +0800) > > CPU: Intel(R) Atom(TM) CPU E3825 @ 1.33GHz > DRAM: 2 GiB > MMC: pci_mmc: 0, pci_mmc: 1, pci_mmc: 2 > Loading Environment from SPI Flash... SF: Detected n25q064a with page > size 256 Bytes, erase size 4 KiB, total 8 MiB > *** Warning - bad CRC, using default environment > > Video: 1280x1024x32 > Model: Intel Minnowboard Max > Net: > Warning: eth_rtl8169 using MAC address from ROM > eth0: eth_rtl8169 > Hit any key to stop autoboot: 0 > => > => saveenv > Saving Environment to SPI Flash... SF: Detected n25q064a with page > size 256 Bytes, erase size 4 KiB, total 8 MiB > Erasing SPI flash...Writing to SPI flash...done > OK > => reset > resetting ... > > > U-Boot 2020.07-rc3-00034-g0fd5234 (May 28 2020 - 15:34:45 +0800) > > CPU: Intel(R) Atom(TM) CPU E3825 @ 1.33GHz > DRAM: 2 GiB > MMC: pci_mmc: 0, pci_mmc: 1, pci_mmc: 2 > Loading Environment from SPI Flash... SF: Detected n25q064a with page > size 256 Bytes, erase size 4 KiB, total 8 MiB > *** Warning - bad CRC, using default environment > > Video: 1280x1024x32 > Model: Intel Minnowboard Max > Net: > Warning: eth_rtl8169 using MAC address from ROM > eth0: eth_rtl8169 > Hit any key to stop autoboot: 0 > =>
Hi Bin. You can use 'sf test' as well. That fails for me at present. I did notice that a while back but then forgot about it. I'm not yet running tests automatically on boards (although my lab is coming along) and I don't think there even is a test for persistent environment. If I recall, the problem started with the conversion to spi_mem. But at least for me, the MRC writing works. Regards. Simon
