The CURSOR_ON, CURSOR_OFF, and CURSOR_SET macros are defined incorrectly.  If
cursor support is disabled, then these macros are defined to nothing, but
then they are used like this:

        if (console_col < CONSOLE_COLS)
                CURSOR_OFF
        console_row++;

which was compiled like this:

        if (console_col < CONSOLE_COLS)
                console_row++;

This is obviously not what was intended.

Signed-off-by: Timur Tabi <ti...@freescale.com>
---

This patch depends on

video: cfb_console: add support for 4bpp bitmaps with GDF_32BIT_X888RGB

 drivers/video/cfb_console.c |   24 ++++++++++++++----------
 1 files changed, 14 insertions(+), 10 deletions(-)

diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index 1d52819..52e7fb4 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -230,8 +230,8 @@ CONFIG_VIDEO_HW_CURSOR:          - Uses the hardware cursor 
capability of the
 #error only one of 
CONFIG_CONSOLE_CURSOR,CONFIG_VIDEO_SW_CURSOR,CONFIG_VIDEO_HW_CURSOR can be 
defined
 #endif
 void   console_cursor (int state);
-#define CURSOR_ON  console_cursor(1);
-#define CURSOR_OFF console_cursor(0);
+#define CURSOR_ON  console_cursor(1)
+#define CURSOR_OFF console_cursor(0)
 #define CURSOR_SET
 #ifndef CONFIG_I8042_KBD
 #warning Cursor drawing on/off needs timer function s.a. drivers/input/i8042.c
@@ -248,8 +248,8 @@ void        console_cursor (int state);
 #endif
 #define CURSOR_ON
 #define CURSOR_OFF video_putchar(console_col * VIDEO_FONT_WIDTH,\
-                                console_row * VIDEO_FONT_HEIGHT, ' ');
-#define CURSOR_SET video_set_cursor();
+                                console_row * VIDEO_FONT_HEIGHT, ' ')
+#define CURSOR_SET video_set_cursor()
 #endif /* CONFIG_VIDEO_SW_CURSOR */
 
 
@@ -260,7 +260,7 @@ void        console_cursor (int state);
 #define CURSOR_ON
 #define CURSOR_OFF
 #define CURSOR_SET video_set_hw_cursor(console_col * VIDEO_FONT_WIDTH, \
-                 (console_row * VIDEO_FONT_HEIGHT) + video_logo_height);
+                 (console_row * VIDEO_FONT_HEIGHT) + video_logo_height)
 #endif /* CONFIG_VIDEO_HW_CURSOR */
 
 #ifdef CONFIG_VIDEO_LOGO
@@ -651,7 +651,8 @@ static void console_scrollup (void)
 
 static void console_back (void)
 {
-       CURSOR_OFF console_col--;
+       CURSOR_OFF;
+       console_col--;
 
        if (console_col < 0) {
                console_col = CONSOLE_COLS - 1;
@@ -674,7 +675,7 @@ static void console_newline (void)
           is >= CONSOLE_COLS
         */
        if (console_col < CONSOLE_COLS)
-               CURSOR_OFF
+               CURSOR_OFF;
        console_row++;
        console_col = 0;
 
@@ -690,7 +691,8 @@ static void console_newline (void)
 
 static void console_cr (void)
 {
-       CURSOR_OFF console_col = 0;
+       CURSOR_OFF;
+       console_col = 0;
 }
 
 /*****************************************************************************/
@@ -711,7 +713,8 @@ void video_putc (const char c)
                break;
 
        case 9:         /* tab 8 */
-               CURSOR_OFF console_col |= 0x0008;
+               CURSOR_OFF;
+               console_col |= 0x0008;
                console_col &= ~0x0007;
 
                if (console_col >= CONSOLE_COLS)
@@ -734,7 +737,8 @@ void video_putc (const char c)
                        nl = 0;
                }
        }
-CURSOR_SET}
+       CURSOR_SET;
+}
 
 
 /*****************************************************************************/
-- 
1.7.2.1


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to