[PATCH] spi: cadence_spi: Add octal and quad write support

[Ley Foon Tan]

In Commit d64077202158 ("spi: cadence_qspi: Move to spi-mem framework")
it removes setting to quad write bit by accident. This commit restores
it back and also adding checking for octal support.

Fixes: d64077202158 ("spi: cadence_qspi: Move to spi-mem framework")

Signed-off-by: Ley Foon Tan <ley.foon....@intel.com>
---
 drivers/spi/cadence_qspi_apb.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c
index f9675f75a401..aaf5f600c6dc 100644
--- a/drivers/spi/cadence_qspi_apb.c
+++ b/drivers/spi/cadence_qspi_apb.c
@@ -689,6 +689,12 @@ int cadence_qspi_apb_write_setup(struct 
cadence_spi_platdata *plat,
 
        /* Configure the opcode */
        reg = op->cmd.opcode << CQSPI_REG_WR_INSTR_OPCODE_LSB;
+
+       if (op->data.buswidth == 8)
+               reg |= CQSPI_INST_TYPE_OCTAL << 
CQSPI_REG_WR_INSTR_TYPE_DATA_LSB;
+       else if (op->data.buswidth == 4)
+               reg |= CQSPI_INST_TYPE_QUAD << CQSPI_REG_WR_INSTR_TYPE_DATA_LSB;
+
        writel(reg, plat->regbase + CQSPI_REG_WR_INSTR);
 
        writel(op->addr.val, plat->regbase + CQSPI_REG_INDIRECTWRSTARTADDR);
-- 
2.19.0