This is the second patch set series prepared on top of the
first patch set ("add initial support for broadcom NS3 soc").This patch set will add following, -dt nodes and defconfig options for basic device like pinctrl, gpio, mmc, qspi, wdt, i2c and pcie. -start wdt service -Enable GPT commands -Enable EXT4 and FAT fs support Pramod Kumar (2): arm: dts: ns3: add emmc node arm: dts: ns3: add sp805 watchdog node Rayagonda Kokatanur (12): configs: ns3: enable pinctrl driver dt-bindings: pinctrl: add ns3 pads definition arm: dts: ns3: add pinctrl node arm: dts: ns3: add gpio node configs: ns3: enable BCM IPROC mmc driver configs: ns3: enable mmc commands arm: dts: ns3: add qspi node arm: dts: ns3: add i2c node configs: ns3: enable gpt commands configs: ns3: enable EXT4 and FAT fs support configs: ns3: enable sp805 watchdog driver board: ns3: start sp805 watchdog service Srinath Mannam (1): arm: dts: ns3: add PAXB PCIe host and phy node arch/arm/dts/ns3-board.dts | 58 ++++ arch/arm/dts/ns3-pinctrl.dtsi | 321 ++++++++++++++++++ arch/arm/dts/ns3.dtsi | 224 ++++++++++++ board/broadcom/bcmns3/ns3.c | 56 +++ configs/bcm_ns3_defconfig | 19 ++ .../dt-bindings/pinctrl/brcm,pinctrl-ns3.h | 41 +++ 6 files changed, 719 insertions(+) create mode 100644 arch/arm/dts/ns3-pinctrl.dtsi create mode 100644 include/dt-bindings/pinctrl/brcm,pinctrl-ns3.h -- 2.17.1
