Hi Tom, On 12/05/20 1:11 AM, Tom Rini wrote: > Given limitations on the current implementation of our test framework, > having both am65x_evm_r5 and am65x_evm_a53 have serial output on the > same port confuses the tests. If we disable serial output in r5 and > disable the SPL tests as well, we can run the rest of the testsuite on > am65x_evm_a53. > > Cc: Lokesh Vutla <lokeshvu...@ti.com> > Signed-off-by: Tom Rini <tr...@konsulko.com> > --- > For practical reasons this depends on > http://patchwork.ozlabs.org/project/uboot/patch/20200507230810.21476-1-sam...@sholland.org/ > to build. Since this also removes YMODEM support, I assume it breaks a
Right this breaks UART boot which is very useful for remote testing of U-Boot. This cannot be compromised. May be I am missing something, Can you explain what is the problem here? Thanks and regards, Lokesh > functional use case, so I'm not sure this is best. Stephen Warren > suggested a rework to the pytest framework that I haven't had a chance > to try and do yet. > --- > configs/am65x_evm_r5_defconfig | 2 -- > 1 file changed, 2 deletions(-) > > diff --git a/configs/am65x_evm_r5_defconfig b/configs/am65x_evm_r5_defconfig > index 4fc199e80911..2c61bee4b8bc 100644 > --- a/configs/am65x_evm_r5_defconfig > +++ b/configs/am65x_evm_r5_defconfig > @@ -11,7 +11,6 @@ CONFIG_ENV_SIZE=0x20000 > CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000 > CONFIG_DM_GPIO=y > CONFIG_SPL_MMC_SUPPORT=y > -CONFIG_SPL_SERIAL_SUPPORT=y > CONFIG_SPL_DRIVERS_MISC_SUPPORT=y > CONFIG_SPL_STACK_R_ADDR=0x82000000 > CONFIG_NR_DRAM_BANKS=2 > @@ -41,7 +40,6 @@ CONFIG_SPL_REMOTEPROC=y > # CONFIG_SPL_SPI_FLASH_TINY is not set > CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y > CONFIG_SPL_SPI_LOAD=y > -CONFIG_SPL_YMODEM_SUPPORT=y > CONFIG_HUSH_PARSER=y > CONFIG_CMD_BOOTZ=y > CONFIG_CMD_ASKENV=y >
