For some reason Atmel changed the GPBR address for the AT91SAM9XE to be different from the engineering samples and the AT91SAM9260. Also let the correct SoC name be defined.
Signed-off-by: Reinhard Meyer <u-b...@emk-elektronik.de> --- one probably need not understand why the first mail got clobbered up in spaces at start of each line... arch/arm/include/asm/arch-at91/at91sam9260.h | 19 +++++++++++++++---- 1 files changed, 15 insertions(+), 4 deletions(-) diff --git a/arch/arm/include/asm/arch-at91/at91sam9260.h b/arch/arm/include/asm/arch-at91/at91sam9260.h index ec04318..91ea800 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9260.h +++ b/arch/arm/include/asm/arch-at91/at91sam9260.h @@ -59,7 +59,16 @@ #define AT91_RTT_BASE 0xfffffd20 #define AT91_PIT_BASE 0xfffffd30 #define AT91_WDT_BASE 0xfffffd40 -#define AT91_GPR_BASE 0xfffffd50 +/* + * The latest revision of the AT91SAM9XE has the GPBR moved up 0x10. + * (its not a bug, its a feature...) + * Maybe we can figure a dynamic way to handle this later... + */ +#ifdef CONFIG_AT91SAM9XE +# define AT91_GPR_BASE 0xfffffd60 +#else +# define AT91_GPR_BASE 0xfffffd50 +#endif #ifdef CONFIG_AT91_LEGACY @@ -140,10 +149,12 @@ /* * Cpu Name */ -#if defined(CONFIG_AT91SAM9260) -#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9260" +#if defined(CONFIG_AT91SAM9XE) +# define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9XE" +#elif defined(CONFIG_AT91SAM9260) +# define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9260" #elif defined(CONFIG_AT91SAM9G20) -#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9G20" +# define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9G20" #endif #endif -- 1.5.6.5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
