Dear Thomas Petazzoni, I can find no comments or anything for this patch.
> The Calao USB A9263 board is a board manufactured and sold by Calao > Systems <http://www.calao-systems.com>. Its components are very > similar to the AT91SAM9263EK board, so its configuration is based > on the configuration of this board. There are however some > differences: different clocks, no LCD, etc. > MAINTAINERS | 4 + > MAKEALL | 1 + > Makefile | 3 + Please change this to use boards.cfg instead. > +# (C) Copyright 2003-2008 > +# Wolfgang Denk, DENX Software Engineering, w...@denx.de. > +# > +# (C) Copyright 2008 > +# Stelian Pop <stelian....@leadtechdesign.com> > +# Lead Tech Design <www.leadtechdesign.com> > +# > +# (C) Copyright 2009 > +# Thomas Petazzoni, Free Electrons, <thomas.petazz...@free-electrons.com> Not sure, but I think Copyright should be in newest date at the top... > +#define CONFIG_ATMEL_USART 1 > +#undef CONFIG_USART0 > +#undef CONFIG_USART1 > +#undef CONFIG_USART2 > +#define CONFIG_USART3 1 /* USART 3 is DBGU */ Someone complained earlier in a similiar case that #undefs are not allowed here, convert this into a comment _IF_ your board can use other USARTs for console at all. If not drop the #undef lines. If you would like this patch to go mainstream, please resubmit it and make sure it will apply to current top-of-tree . Best Regards Reinhard _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
