From: Ye Li <ye...@nxp.com>
On i.mx7ulp EVK board, we use MX25R6435F NOR flash, add its parameters
and IDs to flash parameter array. Otherwise, the flash probe will fails.
Signed-off-by: Ye Li <ye...@nxp.com>
Signed-off-by: Peng Fan <peng....@nxp.com>
---
drivers/mtd/spi/spi-nor-ids.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index abdf560e02..b80b25650b 100644
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
@@ -159,6 +159,7 @@ const struct flash_info spi_nor_ids[] = {
{ INFO("mx66u2g45g", 0xc2253c, 0, 64 * 1024, 4096, SECT_4K |
SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
{ INFO("mx66l1g45g", 0xc2201b, 0, 64 * 1024, 2048, SECT_4K |
SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ INFO("mx25l1633e", 0xc22415, 0, 64 * 1024, 32, SPI_NOR_QUAD_READ |
SPI_NOR_4B_OPCODES | SECT_4K) },
+ { INFO("mx25r6435f", 0xc22817, 0, 64 * 1024, 128, SECT_4K) },
#endif
#ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */
--
2.16.4
