The controller driver being used is ndfc.c, it doesn't set the
options though. From what I can tell, nand.c calls nand_scan without
actually setting the nand options. I have been setting chip->options to
include NAND_BUSWIDTH_16, but want to move all my changes back to board
specific code to eventually submit for review.
/* Lookup the flash id */
for (i = 0; nand_flash_ids[i].name != NULL; i++) {
if (dev_id == nand_flash_ids[i].id) {
type = &nand_flash_ids[i];
break;
}
}
if (!type)
return ERR_PTR(-ENODEV);
if (!mtd->name)
mtd->name = type->name;
chip->chipsize = type->chipsize << 20;
Since type is set to the options read from nand_flash_ids in the
nand_get_flash_type function, would it be appropriate to just set
chip->options to type->options as is done with the chipsize? If not,
what would be the most acceptable way to do this?
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
