We get two build errors:
fsl_elbc_nand.c: In function 'fsl_elbc_run_command':
fsl_elbc_nand.c:231: error: 'fsl_lbc_t' has no member named 'lsor'
make[1]: *** [/work/wd/tmp-ppc/drivers/mtd/nand/fsl_elbc_nand.o] Error 1
and
ve8313.c: In function 'initdram':
ve8313.c:104: error: expected '=', ',', ';', 'asm' or '__attribute__'
before '*' token
ve8313.c:104: error: 'lbc' undeclared (first use in this function)
ve8313.c:104: error: (Each undeclared identifier is reported only once
ve8313.c:104: error: for each function it appears in.)
ve8313.c:104: error: 'immap_t' has no member named 'lbus'
make[1]: *** [ve8313.o] Error 1
make: *** [board/ve8313/libve8313.a] Error 2
Due to changes to unifiy local bus struct definitions.
Reported-by: Wolfgang Denk <w...@denx.de>
Signed-off-by: Kumar Gala <ga...@kernel.crashing.org>
---
* Removed change to fsl_elbc_nand.c as Scott points out we shouldn't build
this if we aren't already CONFIG_FSL_ELBC.
board/ve8313/ve8313.c | 2 +-
include/configs/ve8313.h | 1 +
2 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/board/ve8313/ve8313.c b/board/ve8313/ve8313.c
index 8ba1b19..2272ff0 100644
--- a/board/ve8313/ve8313.c
+++ b/board/ve8313/ve8313.c
@@ -101,7 +101,7 @@ static long fixed_sdram(void)
phys_size_t initdram(int board_type)
{
volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
- volatile fsl_lbus_t *lbc = &im->lbus;
+ volatile fsl_lbc_t *lbc = &im->im_lbc;
u32 msize;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h
index 1589913..56d24f9 100644
--- a/include/configs/ve8313.h
+++ b/include/configs/ve8313.h
@@ -39,6 +39,7 @@
#define CONFIG_VE8313 1
#define CONFIG_PCI 1
+#define CONFIG_FSL_ELBC 1
#define CONFIG_BOARD_EARLY_INIT_F 1
--
1.6.0.6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
