Hi Michal,
Yes, I did. The Petalinux image from here:
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841937/Zynq+UltraScale+MPSoC+Ubuntu+part+2+-+Building+and+Running+the+Ubuntu+Desktop+From+Sources
works fine.
Cheers,
András
On 30/04/2020 13:03, Michal Simek wrote:
hi,
that's quite weird. Did you try any petalinux bsp and boot petalinux
boot.bin on that board to make sure that board is fine?
M
On 30. 04. 20 13:01, Major A wrote:
Hi Michal,
Sorry I misunderstood your message, and I didn't spot the attached
files. Now I booted with those two files, there's no output on the
UARTs whatsoever. Is there anything else I can try?
Cheers,
András
On 30/04/2020 12:33, Michal Simek wrote:
Hi,
On 30. 04. 20 12:19, Major A wrote:
Hi Michal,
can you please try these files in SD boot mode?
Done, here are two logs, both in SD boot mode.
First, log.sd is with SD card inserted (with the image files that
apparently refuse to work other than the early UART message).
The other file, log.no-sd, is with no card inserted.
we don't understand each other. I sent you boot.bin and image.itb. Just
copy them to SD card, switch board to sd boot mode and power it up.
Thanks,
Michal
