Hi all, On 29/04/2020 22:11, Simon Glass wrote: > Hi Tom, > > On Wed, 15 Apr 2020 at 13:59, Tom Rini <tr...@konsulko.com> wrote: >> >> On Tue, Apr 14, 2020 at 08:23:10PM -0600, Simon Glass wrote: >>> Hi, >>> >>> On Sun, 22 Mar 2020 at 21:16, Simon Glass <s...@chromium.org> wrote: >>>> >>>> At present the pinctrl nodes are not enabled in pre-relocation U-Boot so >>>> the UARTs do not correctly select the pinconfig to enable the UART pins. >>>> Fix this so that the U-Boot banner is printed. >>>> >>>> This fixes serial output on rpi_3b_32b with the following config.txt >>>> options: >>>> >>>> enable_uart=1 >>>> gpu_freq=250 >>>> >>>> Signed-off-by: Simon Glass <s...@chromium.org> >>>> Fixes: 9821636b64 (bcm2835_pinctrl: Probe pre-reloc) >>>> --- >>>> >>>> Changes in v2: >>>> - Update commit message >>>> >>>> arch/arm/dts/bcm283x-u-boot.dtsi | 8 ++++++++ >>>> 1 file changed, 8 insertions(+) >>> >>> Any thoughts on this series? At present all my lab tests fail. >> >> I don't know if the problem is my firmware is too old (and so works) or >> your firmware is too old (and so fails) or if there's some >> phase-of-the-moon problem. So while I'd like to know _why_ my 3B is >> fine and yours is not, we should just take this I suppose. > > It should not harm anything. > > For now I am unable to run rpi tests on mainline. >
Sorry for being silent for such a long time. I'll have a look and provide a PR. Regards, Matthias
