On 4/15/20 5:54 PM, Harald Seiler wrote: > Use DM_ETH instead of legacy networking. Add VIO as a fixed regulator > to the relevant device-trees and augment the FEC node with properties > for the reset GPIO. > > It should be noted that the relevant properties for the reset GPIO > already exist in the PHY node but U-Boot currently ignores those and > only supports the bus-level reset properties in the FEC node. > > Signed-off-by: Harald Seiler <h...@denx.de> > --- > > Notes: > Changes in v2: > - Move reset and VIO to device-tree. > - Always enable the clock, not just if CONFIG_FEC_MXC=y. > > Changes in v3: > - Rename the dt file to imx6qdl-dhcom-pdk2-u-boot.dtsi because the PHY > is > pdk2 specific. > - More verbose commit message. > > arch/arm/dts/imx6dl-dhcom-pdk2-u-boot.dtsi | 6 +++ > arch/arm/dts/imx6q-dhcom-pdk2-u-boot.dtsi | 2 + > arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi | 22 +++++++++ > board/dhelectronics/dh_imx6/dh_imx6.c | 51 +-------------------- > configs/dh_imx6_defconfig | 2 + > 5 files changed, 34 insertions(+), 49 deletions(-) > create mode 100644 arch/arm/dts/imx6dl-dhcom-pdk2-u-boot.dtsi > create mode 100644 arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi > > diff --git a/arch/arm/dts/imx6dl-dhcom-pdk2-u-boot.dtsi > b/arch/arm/dts/imx6dl-dhcom-pdk2-u-boot.dtsi > new file mode 100644 > index 000000000000..fc7dffea2a69 > --- /dev/null > +++ b/arch/arm/dts/imx6dl-dhcom-pdk2-u-boot.dtsi
Do we really need a separate DT for DL ? If so, this should be a separate patch.
