Hello Stefan,
Am 08.04.2020 um 19:57 schrieb Stefan B.:
Hi Heiko,
I assume that patchwork does get the patch-series automatically when I send it to
u-boot@lists.denx.de, or am I wrong? Perhaps it is in some pipeline?
normally, yes, patchwork gets the patch automatically...
At least the patch-series appeared in U-Boot Digest ("[RFC PATCH v2 04/13] i2c: add nexell driver"
is in Vol 142, Issue 58).
bye,
Heiko
Regards
Stefan
Am 08.04.20 um 06:08 schrieb Heiko Schocher:
Hello Stefan,
Am 28.03.2020 um 10:43 schrieb Stefan Bosch:
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01:
- i2c/nx_i2c.c: Some adaptions mainly because of changes in
"struct udevice".
- several Bugfixes in nx_i2c.c.
- the driver has been for s5p6818 only. Code extended appropriately
in order s5p4418 is also working.
- "probe_chip" added.
Signed-off-by: Stefan Bosch <stefa...@posteo.net>
---
Changes in v2:
- commit "i2c: mmc: add nexell driver (gpio, i2c, mmc, pwm)" splitted
into separate commits for gpio, i2c, mmc, pwm.
- several Bugfixes in nx_i2c.c.
- the i2c-driver has been for s5p6818 only. Code extended approriately
in order s5p4418 is also working.
- "probe_chip" added to the i2c-driver.
- doc/device-tree-bindings/i2c/nx_i2c.txt added.
doc/device-tree-bindings/i2c/nx_i2c.txt | 28 ++
drivers/i2c/Kconfig | 9 +
drivers/i2c/Makefile | 1 +
drivers/i2c/nx_i2c.c | 649 ++++++++++++++++++++++++++++++++
4 files changed, 687 insertions(+)
create mode 100644 doc/device-tree-bindings/i2c/nx_i2c.txt
create mode 100644 drivers/i2c/nx_i2c.c
I do not find this patch in patchwork ...
Thanks for splitting the big patch into several patches.
Reviewed-by: Heiko Schocher <h...@denx.de>
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: h...@denx.de
