Hi Patrick On 3/31/20 6:04 PM, Patrick Delaunay wrote: > The GPIO support is needed in SPL to managed the SD cart detect > used on stm32mp157c-ev1 and dk2 board. > So this patch activates the associated code in stm32_gpio.c. > > Signed-off-by: Patrick Delaunay <patrick.delau...@st.com> > --- > > drivers/gpio/stm32_gpio.c | 7 +------ > 1 file changed, 1 insertion(+), 6 deletions(-) > > diff --git a/drivers/gpio/stm32_gpio.c b/drivers/gpio/stm32_gpio.c > index f55f834e7d..37a8cfa47a 100644 > --- a/drivers/gpio/stm32_gpio.c > +++ b/drivers/gpio/stm32_gpio.c > @@ -20,7 +20,6 @@ > #define MODE_BITS_MASK 3 > #define BSRR_BIT(gpio_pin, value) BIT(gpio_pin + (value ? 0 : 16)) > > -#ifndef CONFIG_SPL_BUILD > /* > * convert gpio offset to gpio index taking into account gpio holes > * into gpio bank > @@ -147,7 +146,6 @@ static const struct dm_gpio_ops gpio_stm32_ops = { > .set_value = stm32_gpio_set_value, > .get_function = stm32_gpio_get_function, > }; > -#endif > > static int gpio_stm32_probe(struct udevice *dev) > { > @@ -162,7 +160,6 @@ static int gpio_stm32_probe(struct udevice *dev) > > priv->regs = (struct stm32_gpio_regs *)addr; > > -#ifndef CONFIG_SPL_BUILD > struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); > struct ofnode_phandle_args args; > const char *name; > @@ -195,7 +192,7 @@ static int gpio_stm32_probe(struct udevice *dev) > dev_dbg(dev, "addr = 0x%p bank_name = %s gpio_count = %d gpio_range = > 0x%x\n", > (u32 *)priv->regs, uc_priv->bank_name, uc_priv->gpio_count, > priv->gpio_range); > -#endif > + > ret = clk_get_by_index(dev, 0, &clk); > if (ret < 0) > return ret; > @@ -215,9 +212,7 @@ U_BOOT_DRIVER(gpio_stm32) = { > .name = "gpio_stm32", > .id = UCLASS_GPIO, > .probe = gpio_stm32_probe, > -#ifndef CONFIG_SPL_BUILD > .ops = &gpio_stm32_ops, > -#endif > .flags = DM_UC_FLAG_SEQ_ALIAS, > .priv_auto_alloc_size = sizeof(struct stm32_gpio_priv), > };
Reviewed-by: Patrice Chotard <patrice.chot...@st.com> Thanks