[PATCH V3 10/14] ARM: dts: stm32: Repair ethernet operation on AV96

[Marek Vasut]

The AV96 RGMII uses different pinmux for ETH_RGMII_TXD0, ETH_RGMII_RXD2
and ETH_RGMII_TX_CTL. Use the correct pinmux to make ethernet operational.

Reviewed-by: Patrice Chotard <patrice.chot...@st.com>
Reviewed-by: Patrick Delaunay <patrick.delau...@st.com>
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasi...@linaro.org>
Cc: Patrick Delaunay <patrick.delau...@st.com>
Cc: Patrice Chotard <patrice.chot...@st.com>
---
V2: No change
V3: No change
---
 arch/arm/dts/stm32mp157a-avenger96.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts 
b/arch/arm/dts/stm32mp157a-avenger96.dts
index 5c7a326c12..88537e6769 100644
--- a/arch/arm/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/dts/stm32mp157a-avenger96.dts
@@ -95,8 +95,8 @@
 
 &ethernet0 {
        status = "okay";
-       pinctrl-0 = <&ethernet0_rgmii_pins_a>;
-       pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+       pinctrl-0 = <&ethernet0_rgmii_pins_b>;
+       pinctrl-1 = <&ethernet0_rgmii_pins_sleep_b>;
        pinctrl-names = "default", "sleep";
        phy-mode = "rgmii";
        max-speed = <1000>;
-- 
2.25.1