From: Tom Warren <twar...@nvidia.com>
The L4T kernel is 32MB+, and can overwrite the ramdisk/fdt loaded
from extlinux.conf. Adjust the load addresses to fix this for now.
Using the calculated_env addresses table from T186 U-Boot is a
better fix, but it isn't working correctly on T210 U-Boot right now,
so this will do until I can fix it.
Signed-off-by: Tom Warren <twar...@nvidia.com>
---
include/configs/tegra210-common.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/tegra210-common.h
b/include/configs/tegra210-common.h
index 1c53311..1b8e94b 100644
--- a/include/configs/tegra210-common.h
+++ b/include/configs/tegra210-common.h
@@ -46,8 +46,8 @@
"scriptaddr=0x90000000\0" \
"pxefile_addr_r=0x90100000\0" \
"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
- "fdt_addr_r=0x82000000\0" \
- "ramdisk_addr_r=0x82100000\0"
+ "fdt_addr_r=0x83000000\0" \
+ "ramdisk_addr_r=0x83200000\0"
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
--
1.8.2.1.610.g562af5b
-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may
contain
confidential information. Any unauthorized review, use, disclosure or
distribution
is prohibited. If you are not the intended recipient, please contact the
sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------
