When MACB_ZYNQ is enabled there is compilation warnings drivers/net/macb.c: In function ‘_macb_init’: drivers/net/macb.h:675:33: error: ‘MACB_DMACFG’ undeclared (first use in this function); did you mean ‘MACB_MCF’? writel((value), (port)->regs + MACB_##reg) ^~~~~
It has been caused by changing macros name by commit below. Fixes: 6c636514d499 ("net: macb: sync header definitions as taken from Linux") Signed-off-by: Michal Simek <michal.si...@xilinx.com> --- Xilinx is not using this driver. We are using zynq_gem one but I found it when I was comparing one setting. Tom: I would consider this as FIX and would be good if you can take it to the current release but up2you. --- drivers/net/macb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 631b53b0930a..bd588cab06b3 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -807,7 +807,7 @@ static int _macb_init(struct macb_device *macb, const char *name) macb->next_rx_tail = 0; #ifdef CONFIG_MACB_ZYNQ - macb_writel(macb, DMACFG, MACB_ZYNQ_GEM_DMACR_INIT); + gem_writel(macb, DMACFG, MACB_ZYNQ_GEM_DMACR_INIT); #endif macb_writel(macb, RBQP, macb->rx_ring_dma); -- 2.26.0