- As there is a requirement to store certain data, we need a persistent
storage in u-boot. Hence, we need to save env in NAND
- Add default Guardian environment variables
- Update partition table:
- Reserve some space for experimentation, this ensures proper
backwards compatibility
- Update defconfig accordingly
Signed-off-by: Moses Christopher <bollavarapumoses.christop...@in.bosch.com>
---
arch/arm/dts/am335x-guardian.dts | 27 ++++++++++++++++++++++++++-
configs/am335x_guardian_defconfig | 9 +++++++--
include/configs/am335x_guardian.h | 13 +++++++++++++
3 files changed, 46 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/am335x-guardian.dts b/arch/arm/dts/am335x-guardian.dts
index b554be97a3..7e70a96d25 100644
--- a/arch/arm/dts/am335x-guardian.dts
+++ b/arch/arm/dts/am335x-guardian.dts
@@ -202,8 +202,33 @@
};
partition@6 {
+ label = "u-boot-2";
+ reg = <0x300000 0x100000>;
+ };
+
+ partition@7 {
+ label = "u-boot-2.backup1";
+ reg = <0x400000 0x100000>;
+ };
+
+ partition@8 {
+ label = "u-boot-env";
+ reg = <0x500000 0x40000>;
+ };
+
+ partition@9 {
+ label = "u-boot-env.backup1";
+ reg = <0x540000 0x40000>;
+ };
+
+ partition@10 {
+ label = "splash-screen";
+ reg = <0x580000 0x40000>;
+ };
+
+ partition@11 {
label = "UBI";
- reg = <0x300000 0x1fd00000>;
+ reg = <0x5c0000 0x1fa40000>;
};
};
};
diff --git a/configs/am335x_guardian_defconfig
b/configs/am335x_guardian_defconfig
index 6bd5f0a9e5..b0033810b9 100644
--- a/configs/am335x_guardian_defconfig
+++ b/configs/am335x_guardian_defconfig
@@ -5,6 +5,7 @@ CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_ENV_SIZE=0x40000
+CONFIG_ENV_OFFSET=0x500000
CONFIG_AM33XX=y
CONFIG_TARGET_AM335X_GUARDIAN=y
CONFIG_SPL_SERIAL_SUPPORT=y
@@ -22,6 +23,11 @@ CONFIG_ARCH_MISC_INIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_SEPARATE_BSS=y
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_ENV_OFFSET_REDUND=0x540000
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_ENV_IS_NOWHERE=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_ETH_SUPPORT=y
CONFIG_SPL_I2C_SUPPORT=y
@@ -49,7 +55,7 @@ CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:256k(SPL),256k(SPL.backup1),256k(SPL.backup2),256k(SPL.backup3),1m(u-boot),1m(u-boot.backup1),-(UBI)"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=nand.0:256k(SPL),256k(SPL.backup1),256k(SPL.backup2),256k(SPL.backup3),1m(u-boot),1m(u-boot.backup1),1m(u-boot-2),1m(u-boot-2.backup1),256k(u-boot-env),256k(u-boot-env.backup1),256k(splash-screen),-(UBI)"
CONFIG_CMD_UBI=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_ISO_PARTITION is not set
@@ -57,7 +63,6 @@ CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
# CONFIG_SPL_OF_CONTROL is not set
CONFIG_DEFAULT_DEVICE_TREE="am335x-guardian"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SPL_DM=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_AM33XX=y
diff --git a/include/configs/am335x_guardian.h
b/include/configs/am335x_guardian.h
index 3c6147a266..1ac5e2e240 100644
--- a/include/configs/am335x_guardian.h
+++ b/include/configs/am335x_guardian.h
@@ -42,10 +42,23 @@
#include <config_distro_bootcmd.h>
+#define GUARDIAN_DEFAULT_PROD_ENV \
+ "factory_assembly_status=0\0" \
+ "main_pcba_part_number=0\0" \
+ "main_pcba_supplier=0\0" \
+ "main_pcba_timestamp=0\0" \
+ "main_pcba_hardware_version=0\0" \
+ "main_pcba_id=0\0" \
+ "main_pcba_aux_1=0\0" \
+ "main_pcba_aux_2=0\0" \
+ "main_pcba_aux_3=0\0" \
+ "main_pcba_aux_4=0\0" \
+
#define CONFIG_EXTRA_ENV_SETTINGS \
AM335XX_BOARD_FDTFILE \
MEM_LAYOUT_ENV_SETTINGS \
BOOTENV \
+ GUARDIAN_DEFAULT_PROD_ENV \
"bootubivol=rootfs\0" \
"altbootcmd=" \
"setenv boot_config \"extlinux-rollback.conf\"; " \
--
2.20.1
